PRS-812RM Surface Resistance MeterKit
TEST ANTI-STATIC, STATICDISSIPATIVE AND CONDUCTIVE SURFACES
Surface Resistance Tester from 0.10 Ω to 1 Teraohm
Constant Volatges 10 volts and 100 volts
Automatic Electrification Period
Determines if a surface is Dissipative, Conductive, orInsulative
Measures resistance point-to-point(Rtt) and resistance to ground(Rtg)
Measures resistance of ESD Flooring, ESD Worksurfaces andPackaging
Conforms to all ESD Association Standards for ResistiveCharacterization
Includes 2 each Surface Resistance Probes
Packaged in a hard shell Carrying Case
Certificate of Calibration Traceable to NIST included
2-year Limited Warranty on Main Instrument
Accurate. Digital.Portable.
The PRS-812B Surface Resistance Ohmmeter is a wide range portableconstant voltage resistance instrument designed for makingpoint-to-point and resistance to ground measurements. The PRS-812Bis a reliable instrument withoutstanding accuracy andperformance.The PRS-812B is extremely fast with a constant testvoltage system that is incredibly stable and consistent. ThePRS-812B is a lightweight solution to a portable instrument withcapabilities of storing up to 120 data points.
Ideal in a Variety ofApplications
The PRS-812B’s accurate wide range of 0.10 to 1.00x1012 ohms offers exceptionalflexibility in measurement applications. Combined with the includedConductive Rubber Electrodes, you can measurement resistance on thefollowing:
ESD Flooring
ESD Worksurface
ESD Carts
Shelving
ESD Gloves
Furniture
RepeatableMeasurements
The PRS-812RM Surface Resistance System Kit includes 2 eachPRS-801W Rubber Electrodes which are precision milled resistanceprobes with conductive rubber pad for use when makingpoint-to-point (Rtt)or point-to-ground (Rtg) resistancemeasurements. Used for or testing ESD floors,worksurfaces, floor mats or any flat object, the probes producesrepeatable measurements in accordance with ESD Associationstandards.
Hundred of hours of on asingle charge
Using Li-ion technology, the rechargeable battery pack will allowyou to make measurements for almost 500 hours before chargingagain. Typically, the PRS-812B will take approximately 8,000measurements before you need to charge it. And with the easy-accessbattery door you can make battery swaps fast.
The 801B-012 battery packs have been tested and were found tocomply with the criteria of “UN Model Regulations, Manual of Testand Criteria, ST/SG/AC.10/11/Rev.7 Part III, subsection 38.3”, alsoknown as “UN38.3”. As a result they can be shipped unrestrictedinternationally by any means.
Designed to be moreproductive and work more efficiently
6 digit, 7 segment color display
Displays either exponential or ohmic measurements
Capable of storing up to 120 resistance measurements
Battery pack easily accessible for replacement or disconnect
Indicates the state of the battery o nthe display
Easily charge using the supplied USB cable and intenational wallcharger
