PAS-853BRM数字表面电阻测试套件
PAS-853BRM Digital Surface Resistance Test Kit
宽范围表面电阻欧姆表套件
WIDE RANGE SURFACE RESISTANCE OHM METER KIT
●表面电阻套件从 0.01 ohms 到 9.99x10 12 ohms
Surface Resistance Kit from 0.01 ohm to 9.99x1012 ohms
●标称全范围公差平均值 <±5%
Nominal Full Range Tolerance Averages <±5%
●全自动电阻量程、测试电压和通电周期控制
Fully Automatic Resistance Range, Test Voltage andElectrification Period control
●确定表面是耗散的、导电的还是绝缘的
Determines if a surface is Dissipative, Conductive, orInsulative
●测量电阻点对点 (Rtt) 和点对地 (Rtg)
Measures resistance point-to-point(Rtt) and point-to-ground(Rtg)
●测量防静电地板、ESD 工作表面和包装材料的电阻
Measures resistance of Static Control Floors, ESD Work Surfacesand Packaging Material
●符合所有 ESD 协会电阻特性标准
Conforms to all ESD Association Standards for ResistiveCharacterization
●包括 2 个导电橡胶电极
Includes 2 each Conductive Rubber Electrodes
●包装在硬壳手提箱中
Packaged in a hard shell Carrying Case
●包括可溯源至 NIST 的校准证书
Certificate of Calibration Traceable to NIST included
宽范围电阻套件
Wide Range Resistance Kit
PAS-853BRM 数字表面电阻测试套件是 ESD Plant Auditor 的理想套件。它包括 PAS-853B宽量程欧姆表，每个 PRS-801W 5 磅导电橡胶电极有 2 个。
The PAS-853BRM Digital Surface Resistance Test Kit is the idealkit for the ESD Plant Auditor. It includes the PAS-853B Wide RangeOhmmeter with 2 each PRS-801W 5 lbs Conductive RubberElectrodes.
设计用于支持 ESDTR53
Designed to Support ESD TR53
PAS-853B 是一款宽量程欧姆表，可测量 0.01 Ω 至 9.99 x 10 12 Ω。该套件设计用于测量点对点 (Rtt) 或表面对地 (Rtg) 电阻，满足 ESD TR53 的审核要求，同时支持 ANSI/ESDS20.20 计划标准和定期验证要求。
The PAS-853B is a wide range ohmmeter that measures accuratelyfrom 0.01 Ω to 9.99 x 1012 Ω. The kit is designed to measureresistance point-to-point (Rtt) or surface to ground (Rtg), andmeets audit re of ESD TR53, while supporting
ANSI/ESD S20.20 program standard and periodic verificationre.
可变和恒定测试电压
Variable & Constant Test Voltages
●<10 Volts 可变从 0.01 到 9.9x10 3 ohms
<10 Volts Variable from 0.01 to 9.9x103 ohms
●10 伏（±<5% 恒定电压），从1.0x10 4 到 9.99x10 5 欧姆
10 Volts (±<5% Constant Voltage) from 1.0x104 to 9.99x105ohms
●100 伏（±<2% 恒定电压），从1.0x10 6 到 9.99x10 12 欧姆
100 Volts (±<2% Constant Voltage) from 1.0x106 to 9.99x1012ohms
快速可靠的电阻计
A Fast and Reliable Resistance Meter
PAS-853B 是一款轻巧的仪表，内置 3 秒通电周期，可测量 1.00E-2 Ω 到 9.99E+5 Ω 和 8 秒从1.00E+6 Ω 到<1.00 E+12 Ω，使其成为全天测量更多表面的快速简便方法。
The PAS-853B is a lightweight meter with a built-inelectrification period of 3 seconds for measurements from 1.00E-2 Ωto 9.99E+5 Ω and 8 seconds from 1.00E+6 Ω to<1.00E+12 Ω, makingit a quick and easy way to measure more surfaces throughout yourday.
全自动电阻和测试电压
Fully Automatic for Resistance and Test Voltage
PAS-853B 将在您进行测量时自动确定电阻范围和测试电压。在很短通电时间之后，显示屏将冻结测量 10秒。或者，仪表可以选择在连续模式下测量，该模式将继续测量，直到按下重置。
The PAS-853B will determine the resistance range and testvoltage automatically when you make measurements. After the minimumelectrification period, the display will freeze an accuratemeasurement for 10 seconds. Alternatively, the meter has the optionof
measuring in Continuous mode, which will continue to measureuntil Reset is pressed.
用于表面电阻
Conductive Probes for Surface Resistance
的导电探头 PRS-801W 是用于表面电阻测量的导电探头。5lb 电极在 500 ohms 以下测量每个清洁板，符合ANSI/ESD S4.1 和 ANSI/ESD S7.1 对电阻、直径、重量和硬度计的要求。.
The PRS-801W are conductive probes used for surface resistancemeasurements. Measuring under 500 ohms each a clean plate, the 5lbelectrodes meet the re of ANSI/ESD S4.1 and ANSI/ESD S7.1for resistance, diameter, weight and durometer.
符合 ANSI/ESD标准和测试方法
Complies to ANSI/ESD Standards and Test Methods
PAS-853BRM 非常适合按照以下测试程序进行测量：
The PAS-853BRM is ideal for making measurements in accordancewith test procedures in the following:
●地板 - ANSI/ESD S7.1- 材料的电阻特性 地板材料
Floors - ANSI/ESD S7.1- Resistive Characterization of MaterialsFloor Materials
●工作台面 - ANSI/ESD S4.1 工作台面
Worksurfaces - ANSI/ESD S4.1 Worksurfaces
●合规性验证 - ESD TR53 - 电阻测量
Compliance Verification - ESD TR53 - Resistance Measurements
●地板/鞋类 - ANSI/ESD STM97.1 - 地板材料和鞋类 - 结合人体的电阻测量
Floor/Footwear - ANSI/ESD STM97.1 - Floor Materials andFootwear- Resistance Measurement in Combination with a Person
●服装 - ANSI/ESD STM2.1 服装
Garments - ANSI/ESD STM2.1 Garments
●阀座 - ANSI/ESD STM12.1- 阀座 - 电阻测量
Seating - ANSI/ESD STM12.1- Seating - Resistive Measurement
问：此产品哪里生产的？
答：美国
问：此产品交货期多久？
答：4-6周
问：有没有样本资料？
答：有的，有需要可以电话咨询
问：如何确保购买的产品是原装进口的？
答：只要客户在我司购买的进口产品，可以提供报关单或者产地证明。