EX603C00美国PCB客户至上
EX603C00美国PCB厂商合作、EX603C00美国PCB放心之选
Intrinsically safe,industrial, ceramic shear ICP® accel, 10 mV/g, 0.5 to 10kHz, top exit, 2-pin conn., single point ISO 17025 accreditedcalibration
Sensitivity: (±20%) 10 mV/g (1.02 mV/(m/s²))
Frequency Range: (±3dB) 30 to 600000 cpm (0.5 to 10000 Hz)
Sensing Element: Ceramic
Measurement Range: ±500 g (±4905 m/s²)
Weight: 1.8 oz (51 gm)
Product NotesAccessories:Optional Versions:
Frequency Range (±3 dB)30 to 600000 cpm0.5 to 10000Hz[3] Resonant Fre kcpm25 kHz[4] BroadbandResolution (1 to 10000 Hz)2000 µg19620µm/sec2[4] Non-Linearity±1 %±1%[2] Transverse Sensitivity≤7 %≤7 %
ENVIRONMENTALOverload Limit (Shock)5000 g pk49050 m/s² pk
Temperature Range-65 to +250 °F-54 to +121 °C
Temperature ResponseSee Graph %/°FSee Graph %/°F[4] EnclosureRatingIP68IP68
ELECTRICALSettling Time (within 1% of bias)≤3.0 sec≤3.0 sec
Discharge Time Constant≥0.4 sec≥0.4 sec
Excitation Voltage18 to 28 VDC18 to 28 VDC
Constant Current Excitation2 to 20 mA2 to 20 mA
Output Impedance<150 Ohm<150 Ohm
Output Bias Voltage8 to 12 VDC8 to 12 VDC
Spectral Noise (10 Hz)85 µg/√Hz834(µm/sec2)/√Hz[4] Spectral Noise (100 Hz)20µg/√Hz196 (µm/sec2)/√Hz[4] Spectral Noise (1kHz)5 µg/√Hz49.1 (µm/sec2)/√Hz[4] ElectricalIsolation (Case)>100000000 Ohm>100000000 Ohm
PHYSICALSize - Hex11/16 in18 mm
Size - Height1.65 in42.2 mm
Weight1.8 oz51 gm
Mounting Thread1/4-28 FemaleNot Applicable[5] Mounting Torque2to 5 ft-lb2.7 to 6.8 Nm
Sensing ElementCeramicCeramic
Sensing GeometryShearShear
Housing MaterialStainless SteelStainless Steel
SealingWelded HermeticWelded Hermetic
Electrical Connector2-Pin MIL-C-50152-Pin MIL-C-5015
Electrical Connection PositionTopTop
All specifications are at room temperature unless otherwisespecified.
[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of thespecified fre
[4] Typical.
[5] 1/4-28 has no e in S.I. units.
[6] See PCB Declaration of Conformance PS023 or PS060 fordetails.
(EX) Hazardous Area Approval- contact factory for specificapprovals
ENGLISHSI Hazardous Area ApprovalEEx ia IICT4, -40°C≤Ta≤121°C, II 1 G HazardousArea ApprovalCl I, Div I, Groups A, B, C, D; Cl II, Div I, GroupsE, F, G; Cl III, Div I Hazardous AreaApprovalEx ia IIC T4, AExia IIC,T4 Hazardous Area ApprovalCl I, Div 2,Groups A, B, C, D; ExnL IIC T4, AExnA IICT4 Hazardous Area ApprovalEEx nL IIC T4,-40°C<=Ta<=121°C, II 3 G
(M) Metric Mount
ENGLISHSI
Accessories:
M081A61Mounting Stud(1)508B’ two-conductor,polyurethane-jacketed cable with two-socket, right-angle MIL-C-5016connector on one end and blunt cut on the other end508B: 508BRBZ-000110’ two-conductor,polyurethane-jacketed cable with two-socket MIL-C-5015 connector onone end and blunt cut on the other end 508BR010BZ