ALSEAL 610 TOPCOAT TOUCH-UP

Alseal 610 is a high temperature air dry coating for use as a touchup for Alseal 598 sealer where scratches or abraded areas in thesealer result from assembly of components. It is used to protectand seal the underlying base coat (Alseal 518) in these areas.Surface Preparation The areas to be touched up should be thoroughlydegreased using a degreasing solvent such as alcohol or methylethyl ketone. It is important that the degreasing solvent used doesnot leave a residue. Application Mix thoroughly before use. Alseal610 can be applied by brush or spray. An artist air brush issuggested. Since areas to be touched up will usually be small, anartist paint brush may also be used. Material should be applied ina thin coat to avoid excessive build up and insure a smooth touchup area. Clean Up Clean equipment with hot water immediately afteruse. If coating dries on equipment an alkali water solution may benecessary to remove coating.