SANDSTROM LC-300

NOTICE

Sandstrom LC-300is a lead free lacquer-like dry film lubricant coating containingmolybdenum disulfide and corrosion-inhibiting pigments. This HeatCuring material prevents corrosion, galling, seizing and fretting.It is a low-friction coating that exhibits long wear life whenoperated at -320°F to +400°F under loads exceeding 100,000psi.

LC-300 may beapplied by brush, dip, dip spin or spray method. After it is heatcured, LC-300 is virtually unaffected by atmospheric and frettingcorrosion, solvents, acids, oils and degreasers and is notre-softened at elevated temperatures.

Basic ProductGuidance:

· Use LC-300 or #099 on metalsthat may be adversely affected by a 1 hour @ 400°Fbake cycle.

· Use 9A on metals notaffected by higher bake temperatures.

· Use #099 to meet lowVOC requirements.

Please consultSandstrom Technical Rep during product selection process for bestresults.

OUTSTANDINGFEATURE