PRS-801-WV高品质导电胶电级
PRS-801-WV Premium Conductive Rubber Electrode
高品质5LBS电级，合乎ANSI/ESD S4.1规范和ANSI/ESD S7.1规定
PREMIUM 5LBS ELECTRODES THAT MEETS ANSI/ESD S4.1 AND ANSI/ESDS7.1 RE
▶理想化的原材料和安裝评定或验证
Ideal when or cerftifying material & installation
▶每一个电级的电阻器都低于10欧母
Each electrode has a resistance of less than 10 ohms
▶平面度的测量和交货合乎Prostat的标准
Flatness is measured and delivered within Prostat's specs
▶盖紧外盖以避免垫片形变
Capped to protect the pad against deformation
▶合乎ANSI/ESD S4.1规范和ANSI/ESD S7.1
In accordance with ANSI/ESD S4.1 amd ANSI/ESD S7.1
▶为每一个高品质电级给予NIST可追溯系统的Certificate
NIST traceable ceritificate provided for each premiumelectrode
高品质导电胶电级
Premium Conductive Rubber Electrode
PRS-801-WV高級导电胶电级特别适合评定或验证新组装的ESD木地板、工作中表层和别的ESD操纵商品。尽管现如今领域中几乎全部5磅2.5英尺的摄像头在交付给终端用户时全是很好的，但由于時间的变化，他们有可能会产生非常大的转变。
The PRS-801-WV Premium Conductive Rubber Electrodes are idealfor or certifying newly installed ESD Floors,Worksurfaces and other ESD control products. While virtually all5lbs, 2.5 inch probes in today’s industry are perfect whendelivered to
their end users, over time they may change considerably.
合乎ANSI/ESD S4规范。1和ANSI/ESD S7.1标准
Meeting ANSI/ESD S4.1 and ANSI/ESD S7.1 Standards
依照ANSI/ESD S4中的表明测量Prostat Premium电级。1和ANSI/ESDS7.1用以测量垫片的净重、直徑、强度和电阻器。
The Prostat Premium Electrodes are measured as described inANSI/ESD S4.1 and ANSI/ESD S7.1 for weight, diameter, durometer andresistance of the pad.
每一个电级的电阻器都低于10Ω.
Each electrode is delivered with a resistance of less than10Ω.
对平整度开展电气测试和认证
Electrically Tested and Verified for Flatness
除此之外，应用Prostat PRV-813导电胶电级认证器对这种电级的平面度开展电气测试。
In addition, these electrodes are electrically tested forflatness using the Prostat PRV-813 Conductive Rubber ElectrodeVerifier.
给予NIST校正
NIST Calibration Provided
追朔至NIST的全部数据信息（包含平整度）的校准证书均完全免费给予。
A certificate of calibration with all data, including flatness,traceable to NIST is provided at no additional cost.
