西门子模块总代理上海代理商

nstallation of a ring topology with the SCALANCEXF204-2BA.西门子模块总代理上海代理商

The SCALANCE XF204-2BA Industrial Ethernet switch with IP20 degreeof protection is installed in a control cabinet together with thenodes to be connected. Electrical and optical versions can beinstalled together in star, line and ring topologies.

When configuring the network, the following boundary conditionsmust be observed:

• Length of the twisted pair line between twoSCALANCE XF-200BA switches:
  Max. 100 m with IE FC cable andIE FC RJ45 plug 180 with BusAdapter BA RJ45. Bymeans of the BA 2xRJ45VD HA, it is also possible to achieveelectrical cabling lengths of up to 1 000 m.

• IP address:
  The IP address is assigned by means of the DHCP (Dynamic HostConfiguration Protocol). If there is no corresponding server in thenetwork, the IP address can be assigned using the supplied softwaretool PST (Primary Setup Tool) or STEP 7/TIA Portal.
  SCALANCE XF204-2BA device configuration is with STEP 7 or theTIA Portal.

Optimal design of a ring topology with SCALANCE XF-200BA andSCALANCE XC-200

Commissioning anddiagnostics西门子模块总代理上海代理商

PROFINET diagnostic interrupts from the SCALANCE XF204-2BA can bedisplayed with the appropriate SIMATIC engineering tools and thenprocessed in the PLC with an expanded diagnostic function. Theengineering outlay for the PLC and HMI has been drastically reduceddue to the complete integration in the SIMATIC concept for systemerror messages.

The SCALANCE XF204-2BA Industrial Ethernet switch can also beintegrated into a network management system, e.g. SINEC NMS,through the standardized Simple Network Management Protocol (SNMP).In the event of faults in the device, error messages(SNMP traps) can be sent to a network management system (e.g.SINEC NMS) or as an email to a specified network administrator.

The integrated web server enables configuration and diagnosticssettings to be made using a standard web browser (e.g. portconfiguration). Statistical information can also be read out overthe web server (e.g. port capacity utilization).

The following information is displayed on site by LEDs:

• Voltage/power

• Errors西门子模块总代理上海代理商

• Redundancy

Ethernet communication via 2, 4 or 8-wire copper cables forcommunication up to 1 000 m with VD technology

Technical specifications西门子模块总代理上海代理商

Article number6GK5204-2AA00-2GF26GK5204-0BA00-2GF2product typedesignationSCALANCE XF204-2BASCALANCE XF204productoptionsXF-200 base device without mounted BusAdapterXF-200 basedevice with mounted BusAdapterstransfer rate  transferrate10 Mbit/s, 100 Mbit/s10 Mbit/s, 100 Mbit/sinterfacesfor communication integrated  number of electricalconnections  ● for network components or terminalequipment04interfaces other  number of electricalconnections  ● for signaling contact11● forpower supply11type of electrical connection  ● forsignaling contact2-pole terminal block2-pole terminalblock● for power supply2-pole terminal block2-pole terminalblockdesign of the removablestorage  ● C-PLUGYesYessignalinputs/outputs  operating voltage of the signalingcontacts  ● at DC ratedvalue24 V24 Voperational current of the signalingcontacts  ● at DC maximum0.1 A0.1 Asupplyvoltage, current consumption, power loss  productcomponent connection for redundant voltage supplyYesYestype ofvoltage 1 of the supply voltageDCDC● supply voltage 1 ratedvalue24 V24 V● power loss [W] 1 ratedvalue8.6 W8.6 W● supply voltage 1 ratedvalue19.2 ... 28.8 V19.2 ... 28.8 V● consumedcurrent 1 maximum0.36 A0.36 A● type of electricalconnection 1 for power supply2-pole terminal block2-pole terminalblock● product component 1 fusing at power supplyinputYesYes● fuse protection type 1 at input for supplyvoltage2.5 A (cannot be changed by user)2.5 A (cannot be changed byuser)ambient conditions  ambienttemperature  ● duringoperation-40 ... +70 °C-40 ... +70 °C● duringstorage-40 ... +85 °C-40 ... +85 °C● duringtransport-40 ... +85 °C-40 ... +85 °Crelativehumidity  ● at 25 °C without condensation duringoperation maximum95 %95 %protection classIPIP20IP20design, dimensions andweights  西门子模块总代理上海代理商
designcompactcompactwidth100 mm100 mmheight117 mm117 mmdepth74 mm74 mmnetweight0.21 kg0.25 kgfastening method● 35 mm top hatDIN rail mountingYesYes● wall mountingNoNo● S7-300 railmountingNoNo● S7-1500 rail mountingNoNoproduct features,product functions, product components general  cascadingin the case of a redundant ring at reconfiguration time of<\~0.3\~s5050cascading in cases of star topologyany (dependingonly on signal propagation time)any (depending only on signalpropagation time)product functions management, configuration,engineering  productfunction  ● CLIYesYes● web-basedmanagementYesYes● MIB supportYesYes● TRAPs viaemailYesYes● configuration with STEP 7YesYes● portmirroringYesYes● multiport mirroringYesYes● PROFINET IOdiagnosisYesYesPROFINET conformity classBBnetwork load classaccording to PROFINET2product function switch-managedYesYesprotocolissupported  ● TelnetYesYes● HTTPYesYes● HTTPSYesYes● TFTPYesYes● FTPNoNo● BOOTPNoNo● DCPYesYes● LLDPYesYes● SNMPv1YesYes● SNMP v2YesYes● SNMP v3YesYesidentification &maintenance function  ● I&M0 - device-specificinformationYesYes● I&M1 – higher leveldesignation/location designationYesYesproduct functionsdiagnostics  product function  ● portdiagnosticsYesYes●西门子模块总代理上海代理商
西门子模块总代理上海代理商

More information

You can order supplementary components for the SIMATIC NET cablingrange from your local contact. Technical support on this subject isavailable from:

J. Hertlein
DI PA DCP IWA
Tel.: +49 (172) 3172810 
Email: juergen.hertlein@siemens.com

SelectionTool:

To support the selection of SCALANCE network components, the TIASelection Tool is available at:

www.siemens.com/tst

Orderingoverview:

You can find more information on the FastConnect range inthe "Cablingtechnology for communication networks inindustry" ordering overview.

西门子模块总代理上海代理商