6GK5216-4GS00-2AC2
TM31 Terminal Module概述
概述
TM31 Terminal Module
With the TM31 Terminal Module, the number of available digitalinputs and outputs and the number of analog input and outputswithin a drive can be expanded.
The TM31 Terminal Module also features relay outputs withchangeover contact and a temperature sensor input.
设计
The following are located on the TM31 Terminal Module:
8 digital inputs
4 bidirectional digital inputs/outputs
2 relay outputs with changeover contact
2 analog inputs
2 analog outputs
1 temperature sensor input for KTY84‑130, Pt1000 or PTC (Pt1000can be used from firmware V4.7 HF17 and higher)
2 DRIVE‑CLiQ sockets
1 connection for the electronics power supply via the 24 V DCsupply connector
1 PE/protective conductor connection
The status of the TM31 Terminal Module is indicated via amulti-color LED.
The TM31 Terminal Module can be snapped onto a TH 35standard mounting rail in accordance with EN 60715(IEC 60715).
The signal cable shield can be attached to the TM31 TerminalModule via a shield connection terminal, e.g. type SK8 supplied byPhoenix Contact or type KLBÜ CO 1 supplied by Weidmüller.The shield connection terminal must not be used as a strain reliefmechanism.
集成
The TM31 Terminal Module can communicate via DRIVE‑CLiQ with thefollowing Control Units.
CU310‑2 Control Unit
CU320‑2 Control Unit
SINUMERIK Control Unit
SIMOTION D Control Unit
SINAMICS DCM Advanced CUD
Connection example of TM31 Terminal Module
技术规范
| TM31 Terminal Module 6SL3055-0AA00-3AA1 | ||
|---|---|---|---|
Power re, max. At 24 V DC without taking account of the digitaloutputs and DRIVE-CLiQ supply | 0.5 A | ||
| 2.5 mm2 | ||
| 20 A | ||
Digital inputs In accordance with IEC 61131‑2 Type 1 | |||
| -3 ... +30 V | ||
| -3 ... +5 V | ||
| 15 ... 30 V | ||
| 9 mA | ||
| |||
| 50 μs | ||
| 100 μs | 1.5 mm2 | |
Digital outputs (continuously short-circuit proof) | 24 V DC | ||
| 100 mA | ||
| 400 mA | ||
| |||
| 150 μs with 0.5 A resistive load | ||
| 500 μs | ||
Analog inputs a switch is used to toggle between voltage and current input | |||
| |||
| -10 ... +10 V | ||
| 100 kΩ | ||
| 11 bits + sign | ||
| |||
| 4 ... 20 mA, -20 ... +20 mA,0 ... 20 mA | 250 Ω | 10 bits + sign |
Analog outputs | |||
| |||
| -3 ... +3 mA | ||
| |||
| 500 Ω in the range -20 ... +20 mA | ||
| |||
Relay outputs CO contacts | |||
| 8 A | ||
| 250 V AC, 30 V DC | ||
| |||
| 2000 VA (cos φ = 1) | ||
| 240 W (resistive load) | ||
| |||
Power loss, max. | 10 W | ||
PE connection | M4 screw | ||
Dimensions | |||
| 50 mm (1.97 in) | ||
| 150 mm (5.91 in) | ||
| 111 mm (4.37 in) | ||
Weight, approx. | 0.49 kg (1.08 lb) | ||
Certificate of suitability | cULus |
1) The specified delay times refer to the hardware. Theactual reaction time depends on the time slice in which the digitalinput/output is processed.
2) If the analog input is to be operated in the signalprocessing sense with continuously variable input voltage, thesampling frequency fa = 1/ttime slice must beat least twice the value of the highest signalfrequency fmax.
| | 6GK5216-4GS00-2AC2 SCALANCE XC216-4C G 可管理层面 2 IE 交换机； IEC 62443-4-2 认证； 全位元； 12x10/100/1000 Mbit/s RJ45 端口；4x 1000 Mbit/s 组合端口（或者 1000 Mbit/ s SFP或者 10/100/1000 Mbit/s RJ45 端口可用）； 1x 控制台端口；诊断 LED； 冗余电源； 温度范围 -40°C至 +70°C； 安装： 凹顶导轨/S7 型轨/墙壁； 冗余功能；办公室 特性（RSTP，VLAN，...)； PROFINET IO设备； 以太网/IP 一致性； C 型插头插槽； |
6GK5216-4GS00-2AC2 6GK5216-4GS00-2AC2