API600伞齿轮闸阀
API600闸阀特点
通过阀座气密性的短程或远程保护提供完全关闭。
Positive shutoff with visual or remote proof of seattightness.没有产品污染的气密性。
No product contamination absolute tightness.双阀座：合成橡胶-金属阀座加上金属-金属第二重密封。
Dual seating.
Elastomer-to-metal seat plus metal-to-metal secondaryseal.防火：如果第二重合成橡胶阀座在火灾期间被损坏，则金属-金属阀座还可以保证气密性。
Fire Safe.
The metal-to-metal seat ensures tightness if the secondaryelastomer seat is damaged during thefire.PTFE阀座镶嵌件：抗介质的腐蚀，在工作温度达到204°C时，具有很好的抗磨能力。
PTFE seat insert
resists corrosive media, has high abrasion resistance andoperates
up to +400°F (204°C).配置410不锈钢和密封焊接的阀座硬面。
Seat hardfaced with SS 410 and seal welded.
易于在线进行阀门阀座维修 EASY IN-LINE VALVE RESEATING
阀座用410不锈钢进行硬面，通过焊接装配延长使用寿命。将楔板从阀体上拆卸后，磨损的软阀座镶嵌件就很容易更换了。在更换阀座镶嵌件之前，关闭流体，减轻压力。
Seats are hardfaced with SS 410 and welded-in for lifetimeservice. A worn soft seat insert can easily be replaced afterremoval of wedge from the body. Shut off flow and relieve pressurebefore replacing the seat insert.
标准 STD
| 设计与制造 Design and Manufacture | 结构长度 Face to face /End to end | 法兰尺寸 Flange Dimension | 对焊连接尺寸 Butt welding dimension | 压力-温度 Pressure Temperature Lating | 试验-检验 Inspection and Test |
| API 600 | ANSI B16.10 | ANSI B16.5 | ANSI B16.25 | ANSI B16.34 | API 598 |
| API 6D | API 6D | ANSI B16.5 | ANSI B16.25 | ANSI B16.34 | API 6D |
压力试验 Pressure Test
| 公称压力PN(Lb) NominalPressure | 强度试验 Shell Test | 水密封试验 Water Seal Test | 气密封试验 Air Seal Test | |||
| MPa | Lbf/in2 | MPa | Lbf/in2 | MPa | Lbf/in2 | |
| 150 | 3.0 | 430 | 2.2 | 315 | 0.4-0.7 | 60-100 |
| 300 | 7.7 | 1110 | 5.7 | 815 | ||
| 600 | 15.3 | 2220 | 11.3 | 630 | ||
| 900 | 23.0 | 3330 | 17 | 2445 | ||
| 1500 | 38.4 | 5560 | 28.2 | 4080 | ||
| 2500 | 64.0 | 9255 | 47.0 | 6790 | ||
