More than 98 % pure micronised molybdenum disulphide powder, packedin bulk for the pre-treatment of all metal or plastic assembliesprior to assembly.
Anti-weartreatment :
- Facilitates running-in, reduces friction forces, preventsseizing, prolongs the life of parts.
- The film formed is not excessively thick and therefore thereis no mechanical slack.
Protectionagainst contact rust and friction :
- Applying OR 05 considerably delays the appearance of the"fretting" phenomenon.
- Bearing rings, cone assemblies, oscillating joints etc.
Does not attract dust because it creates a dry film.
Keeps the same aspect from -200°C to +450°C unlike oil andgrease which harden in the cold and liquefy in the heat.
Applications:
- Compressed gas cylinders and valves, including oxygen, as wellas mechanisms, pressure reducing valves and pipe connections.
- Static or dynamic mechanical parts in use incompatible withliquid or plastic lubricants.
- Automatic weapon mechanisms, guns and ammunition.
- Mechanisms operating in a dusty environment, threaded ornon-threaded assemblies to facilitate installation and subsequentdismantling, eliminating contact rust.
- It should be noted that without air, the product remainseffective even if the parts are heated to a temperature of around600°C.
- Cold and other fittings to facilitate assembly and reduceexertion.
- Various mechanisms subject to significant variations intemperature, making it almost impossible to use liquid or plasticlubricants.
- Dry lubrication of rotating or sliding seals made fromsynthetic materials, including pneumatic control systems notlubricated by traditional processes.
- Cryogenic lubrication.
- Cold forming : forging, wire drawing, etc.
- Can be used as additive in oil, grease and polymers to improvetheir friction coefficient.
纯度超过98%的微细二硫化钼粉末，在组装前批量包装用于所有金属或塑料组件的预处理。
抗磨处理:
-方便磨合，减少摩擦力，防止卡死，延长零件寿命。
-形成的薄膜不会太厚，没有机械松弛。
防止接触生锈和摩擦:
-应用OR 05大大延迟了“微动”现象的出现。
-轴承套圈、圆锥组件、摆动接头等。
不吸引灰尘，因为它创造了一个干燥的膜。
在-200°C到+450°C之间保持相同的外观，不像油和润滑脂在冷时变硬，在热时液化。
应用程序:
-压缩气体钢瓶和阀门，包括氧气，以及机构，减压阀和管道连接。
-使用中的静态或动态机械部件与液体或塑料润滑剂不兼容。
-自动武器装置、枪支和弹药。
-在尘土飞扬的环境中工作的机构，螺纹或非螺纹组件，以方便安装和随后的拆卸，消除接触生锈。
-需要注意的是，在没有空气的情况下，零件被加热到600°C左右的温度，产品仍然有效。
-冷却和其他配件，以方便组装和减少消耗。
-各种机制受温度的显著变化影响，几乎不可能使用液体或塑料润滑剂。
-合成材料制成的旋转或滑动密封的干式润滑，包括不通过传统工艺润滑的气动控制系统。
-低温润滑。
-冷成形:锻压、拉丝等
-可作为润滑油、润滑脂和聚合物的添加剂，以提高其摩擦系数。
