型号： (N)SSHCGEOEU
Type designation (N)SSHCGEOEU
应用
用于频繁更换的动载荷，如地下矿山铲斗(LHD)的卷取电缆，适用于单媒旋卷盘和圈柱卷盘。通过悬挂钢纹线的高抗拉强度和非常高的耐磨性和抗撕裂性的外护套。
Application
For frequently changing dynamic loads,such as reeling cables for scoops (LHDs) in underground mines,suitable for mono-spiral reels and cylincrical reels. High tensilestrength through suspension strand and very high abrasion and tearresistance of the outer sheath.
设计特点
导体 电解钢，镀锡，非常细纹合《FS级)
PE导体 3双同心控制/接地线在外间隙中旋转
绝缘 其本材料:EPR，每合型:3GI3
核心识别 黑色、棕色、灰色
芯部布置 三个主芯与三个控制/接地芯在外部空隙中绞合，层长约6xD
纺纱说明 在内护套和外护套之间的硫化粘结的聚酪线的增强编织物
表面贾盖:约。2596
内鞘 基本材料:EPR，复合型:GM1B
外鞘 基本材料:合成弹性体化合物例如CR，复合型:5GM5，颜色:黄色
Design
features Conductor Electrolytic copper, tinned,very finely stranded (class FS)
PE-Conductor 3double concentric controll/earth wire spinning in outerinterstices
Insulation Basic material:EPR, Compound type: 3GI3
Core identification Black, Brown,Grey
Core arrangement Three main cores strandedwith three control/earth cores in outer interstices, length of layapprox. 6 x D
Description of spinning Reinforced braid of polyester threads in avulcanized bond between inner and outer sheath,
Surface covered: approx. 25%
Inner sheath Basic material: EPR, Compund type: GM1B
Outer sheath Basic material: Synthetic elastomer compound e.g. CR,Compound type: 5GM5, Color: Yellow
电气参数
额定电压 Uo/U = 0,6/1 kV, also permitted for Uo/U= 640/1140V
*大允许工作电压AC 0.7/1.2 kV
*大允许工作电压DC 0.9/1.8千伏
交流测试电压 2.5 kV
Electricalparameters
Rated voltage Uo/U = 0,6/1 kV, also permitted for Uo/U =640/1140V
Maximum permissible operatingvoltage AC 0.7/1.2 kV
Maximum permissible operatingvoltage DC 0.9/1.8 kV
ACtest voltage 2.5 kV
化学参数
耐火性 欧洲规范60332-1-2号际电工委品会60332-1-2
耐油性 EN60811-404，国际电工委员会
耐候性 不受限制地在室外和室内使用，耐臭氧、紫外线和湿气
Chemicalparameters
Resistance to fire EN 60332-1-2, IEC60332-1-2
Resistance to oil EN 60811-404, IEC60811-404
Weather resistance Unrestricted use outdoors and indoors,resistant to ozone, UV and moisture
热参数
同定安装*低环境温度。 -40摄氏度
固定安装*高环境温度 80摄氏度
环境温度在完全弯曲，择作*小值 -25摄氏度
环境温度在完全弯曲，*大操作数 60摄氏度
Thermal parameters
Ambient temperature for fixinstallation min. -40 °C
Ambient temperature for fixinstallation max. 80 °C
Ambient temp. in fully flex. operationmin. -25 °C
Ambient temp. in fully flex. operationmax. 60 °C
力学参数
导体上的拉仲戟荷*大值 30牛顿/平方毫米
扭转应力 50/m
*小弯曲半径 4XD
S型方向变化的*小距离 20XD
行驶速度 *大160米/米
附加测试 反向弯曲试验、辑弯试验
Mechanicalparameters
Tensile load on the conductor max. 30 N/mm²
Torsional stress 50 °/m
Bending radii min. 4 x D
Minimum distance with S-typedirectional changes 20 x D
Travel speed Max. 160 m/min Additionaltests Reversed bending test, roller bending test
PROTOLON(M)-R
PROTOLON(M)-R FO
TENAX M
TENAX SAS
PROTOLON (SB-SAM)
PROTOLON (SB-SAM) Screen
PROTOLON (ST) .../3E
PROTOLON (ST) NTSCGEWOEU
PROTOLON (M)-F
PROTOLON (M)-F
PROTOMONT NSSHOEU
PROTOMONT (M)(N)SHOEU
PROTOMONT EMV-FC (N)SSHCOEU
FELTOFLEX
PROTOLON NTMCGCWOEU
PROTOLON (M) NTMCGCWOEU
OPTOFLEX (M)
PROTOMONT (MSR) 2YSLGCGOEU
L-2YY(Z)Y KF 40
PROTOMONT (V) 1 kV
PROTOMONT (V) 3kV & 6kV
PROTOMONT (VO)
TENAX CTE
PROTOMONT (Z) NSSHKCGEOEU
TENAX-LK
PROTOMONT(S)
CORDAFLEX (S) NSHTOEU
PROTOMONT (M+)
PROTOMONT TBM
TENAX HTT
PROTOMONT Festoon
SUPROMONT (N)3GHSSYCY
PROTOMONT NSSHOEU .../3E
PROTOMONT (EMV-FC)