Model 357C71充电输出加速器美国PCB PIEZOTRONICS现场选型
CHARGE OUTPUT ACCELEROMETER
Model 357C71
Charge output accel., 10 pC/g, 1000g, to 5 kHz, 2-pin conn., 3-hole mount, to +900 F
Sensor can be paired with any one of the charge amplifiers inthe Suggested Accessories section. If paired with a ModelNumber 422M182, cable Model Numbers 013GNGP and 045M19 should beused. If paired with a Model Numbers 421A30 or EX682A40,cable Model Numbers 013GNGP and 045M21 should be used. Cable Model Number 013GNGP is radiation-hardened for nuclearapplications.
Replaces Legacy Model Endevco 6233C-10
Sensitivity: (±5%)10 pC/g (1.02 pC/(m/s²))
Measurement Range: ±1000 g pk (±9810 m/s² pk)
Frequency Range: (±5%)4 kHz (4 kHz)
Weight: 2.6 oz (75 gm)
Specification Notes:
[1] Zero-based, least-squares, straight line method.
[2] Transverse sensitivity is typically ≤ 3%.
[3] Low frequency response is determined by external signalconditioning electronics.
[4] Typical.
[5] See PCB Declaration of Conformance PS081 for details.
* All specifications are at room temperature unless otherwisespecified.
Build Out Your Measurement Chain: