Microset 121 Forming Putty is a two-part, high viscosity, syntheticrubber compound designed for macroscopic moulding of surface shapeand form. The two components of the product are mixed in equalquantities by hand and the mixed compound then pressed against thesurface to be replicated. The product is supplied in two versions,fast curing 121F and slow curing 121S to facilitate ease of useover a wide range of temperatures.
Microset121成型腻子是一种由两部分组成的高粘度合成橡胶化合物，专为表面形状和形状的宏观成型而设计。将产品的两种成分用手等量混合，将混合的化合物压在表面上进行复制。该产品提供两种版本，快速固化121F和缓慢固化121S，以方便在广泛的温度范围内使用。
- Resolution: 10 microns
- Shelf Life: 24 months
- Cured hardness: 77 Shore A
- Shrinkage: Less than 0.1%
- Colour: Part A – Yellow, Part B – Blue, Mixed – Green
- Useable temperature range: -10C to +150C
- Specific Gravity: 1.15g/cm3
- Packaging: 500g Kit (250g Tub Part A + 250g Tub Part B)2kg Kit (1kg Tub Part A + 1kg Tub Part B)
| Microset Grade | *Working Life 25C (mins) | *Cure Time 25C (mins) | Key Features | Typical Applications |
| 121F | 3 | 10 | Fast curing, high viscosity, two part putty, mixed and applied byhand. | Moulding and measurement of surface profiles and geometry. Use inlow or room temperature conditions where rapid results arerequired. |
| 121S | 20 | 60 | Slow curing, high viscosity, two part putty, mixed and applied byhand. | Moulding and measurement of surface profiles andgeometry. Particularly useful for higher ambient temperatureconditions or when moulding large areas. |
