应用领域
该电缆采用线愁对纹整体屏蔽结构，可用于易受到外部高频电场影响造成干扰的传输场合。适用于现代化机械加工、机床工业、机器人和机械生产以及其他需要高柔性的场合。高密度高电导率材料组成的网状屏获层及对纹结构，可确保电缆在往复弯曲的过程中仍有较强的抗干扰能力、特别话用于通信及信号传输用涂的中等机械负载情况下频繁弯曲、缓慢移动时的圣件及有复杂电场于扰的应用场合
产品结构
-导体超精细裸铜丝绞合导体,符合EN60228标准中第6类导体要求-绝缘 特种热塑性混合物绝缘料·
芯线标识 5芯及以内采用不同
颜色标识自6芯以上，采用黑色线芯，连续白色数字编号标识或分色加打点标识3根及以上线芯，可设置有绿/黄接地线芯线结构芯线两两成对绞合
-屏蔽 裸铜丝编织屏蔽，覆盖率≥80%
外护套 特种热塑性混合物护套料
-护套标识 黑色、灰色或橙色护套
技术参数
额定电压Uo/U 300/ 300V & 300/500V
测试电压 1500v&2000v
运行温度 移动安装 -10℃℃至+70℃℃ 固定安装-30℃C至+70℃℃较小弯曲半径 移动安装7.5x电缆直径 固定安装 5x电缆直径工运动速度 Max3 m/s
-往复弯曲循环数 Min 500万
Application field
The cable adopts the overallshield structure of wire worry, which can be used in transmissionoccasions which are susceptible to interference caused by externalhigh-frequency electric field. It is suitable for modern machining,machine tool industry, robot and mechanical production and otheroccasions re high flexibility. The mesh screen layercomposed of high density and high conductivity materials and thegrain structure can ensure that the cable still has a stronganti-interference ability in the process of reciprocating bending,especially for communication and signal transmission with mediummechanical load, frequent bending, slow moving sacred parts andcomplex electric field in the application
Product structure
- Conductor Hyperfine barecopper wire stranded conductor, in accordance with EN60228 Class 6conductor re - insulation special thermoplastic mixtureinsulation material
Different cores are used toidentify 5 cores and within them
Color identification from morethan 6 cores, the use of black core, continuous white numberidentification or color separation plus dot identification 3 ormore cores, can be set with green/yellow ground wire core structurecore wires in pairs stranded
- Shielding Bare copper wirebraid shielding, coverage ≥80%
Outer sheath specialthermoplastic mixture sheath material
- Jacket Identifier Black, greyor orange jacket
Technical parameter
Rated voltage Uo/U 300/300V &300/500V
Test voltage1500v&2000v
Operating temperature Movinginstallation -10 ° C to +70 ° C Fixed installation -30 ° C to +70 °C Small bending radius Moving installation 7.5x Cable diameterFixed installation 5x cable diameter Working speed Max3m/s
- Number of reciprocatingbending cycles Min 5 million
