适合在发电厂使用耐硅胶护套可以抗热，抗化学腐蚀，耐油和耐酸
详细介绍
SiHF-C-Si- 屏蔽硅橡胶电缆结构:镀锡铜 DIN VDE 0295 c5,BS 6360 c.5.EC 60228c1.5砗橡胶绝缘，导体色标参照 DIN VDE 0293-308,单色,或具有白色连续教字的黑色道题，两芯导体:棕色/蓝色， 绕包,黄绿接地线(三苾)砗胶内护套 镀锡铜丝编织,夏盖率约 85% 砗橡胺绝缘外护套护套颜色适宜红棕色。技术参数:具有较高的耐热范围的特殊硅胶单导体电缆适应于DIN VDE 0250 part 1和part816
工作温度:-60°℃~+180°℃瞬间可达到的温度:+2200℃，导体的工作温度:+180。额定电压:300/500V,测试电压: 2000V，绝缘阴抗,200 MQxkm，弯曲半径: 柔软10x外径，固定安装5x外径，阻抗:不大于250Q/km，辐射阻抗:达 20x106cJ/kg(可达20Mrad)产品性能:
耐高油分子，防动植物油，酒精，增塑剂和稀释酸，碱液和盐溶解，氧化物质，热带气候的影响，湖泊水，氧气无卤，参考DIN VDE0482 part 267/EN 50267-2-1/IEC60754-1(等同于DIN VDE 0472part815)耐火性能:不蔓延
测试参考 DIN VDE 0482 part 265-2-1/EN 50265-2-1/EC60332-1(等同于DIN VDE0472 part804 测试方法B)固定安装在露天或通风管系统以及管道中。否则，硅橡胶的机械性能在超过90度的封闭空气中会减弱。
Suitable for use in power plants silicone resistant sheath canresist heat, chemical corrosion, oil and acid
Detailed introduction
Sihf-c-si-shielded silicone rubber cable construction: tinnedcopper DIN VDE 0295-C5,BS 6360 c.5.EC 60228 c1.5 Tridacnideinsulation, conductor color code reference DIN VDE 0293-308,monochrome, or black with white continuous text, Two conductors:brown/blue, wrapped, yellow-green grounding wire (three bibi)Tridacnidacnamine inner sheath tinned copper wire braided, summercover rate about 85% Tridacnamine insulation outer sheath sheathcolor suitable for reddish-brown. Specifications: Special siliconesingle conductor cables with a high heat resistance range for DINVDE 0250 part 1 and part 816
Operating temperature :-60° C ~ +180° C Instant attainabletemperature :+2200 ° C, conductor operating temperature :+180.Rated voltage :300/500V, test voltage: 2000 V, insulated negativeresistance,200 MQxkm, bending radius: soft 10x outer diameter,fixed installation 5x outer diameter, impedance: not more than250Q/km, radiation impedance: up to 20x106 cJ/kg(up to 20Mrad)
Resistance to high oil molecules, resistance to animal and plantoils, alcohol, plasticizers and diluted acids, lye and saltdissolves, oxidizing substances, effects of tropical climate, lakewater, oxygen halogen-free, Reference DIN VDE 0482 part 267/EN50267-2-1/IEC60754-1(equivalent to DIN VDE 0472 Part 815) Fireresistance: non-spreading
Test reference DIN VDE 0482 part 265-2-1/EN50265-2-1/EC60332-1(equivalent to DIN VDE 0472 Part 804 test methodB) Fixed installation in open air or ventilation duct systems andducts. Otherwise, the mechanical properties of silicone rubber willbe weakened in the enclosed air of more than 90 degrees.
