LOX-8 Full Density Thread Seal Tape

Fluoramics’ LOX-8 Full Density Thread Seal Tapes are approved foroxygen service to the following specifications:

• Steady-state oxygen service temperature limit per ASTM G63equals 372° C or 701° F.

• Steady-state oxygen service pressure limit per ISO 21010 equals≤ 345 bar (≤ 5004 psig).

Other Specification of LOX-8 Full Density Pipe Thread Tape:

• 1.20 to 1.55 g/cm3

• MIL-T-27730A

• A-A-58092

• FDA approved for food use 21 CFR 177.1550

• Available in 1/4″, 1/2″, and 3/4″ width

• Compatible with oxygen, liquids, gases, and aggressivechemicals.

Description

LOX-8Full Density Thread Seal Tape is a multi-purpose pipesealing tape for sealing threads and preventing leaks. It issuitable for sealing threaded connections in multiple environments,is oxygen-approved, and colored green to designate suitability foruse on oxygen connections. May be used alone or with withFluoramics’ pipe thread sealants.

Features andBenefits

• Extreme temperatures: -240°C to +287°C (-400°F to +550°F)

• Thread lubricant, anti-seize, and prevents galling in stainlesssteel fittings

• Compatible with oxygen, water, liquids, gases, aggressivechemicals, acids (see list below)

• Chemically inert

• Waterproof premium plumbers tape

• Oxygen Tested: ASTM G72

• Approvals: MIL-T-27730A, A-A-58092

• Full Density

• FDA approved for food use 21 CFR 177.1550

• Joint sealing tape approved for high pressure applications:pressure rating*: 10,000 psi general use, 5004 psi pure oxygen

• Silicone-free

• Available in widths of 6.35 mm (1/4″), 12.7 mm (1/2″), and 19.05mm (3/4″) in different lengths

• Made in the USA

*Pressure rating is relativeto the torque and quality of the threads and the amount of tape andsealant used. Maximum oxygen pressure limit guide only. Can be usedat pressures above this limit with justified Fire RiskAnalysis.