Easy-flo Flux Powder is very fluid at the bottom end of its workingrange resulting in early and extensive flux spread. This ensuresthat the joint surfaces are well protected from oxidation at theearliest possible point of the brazing operation.
Data Sheets
Download the Easy-Flo Flux Powder technical data sheet (TDS) andthe Easy-Flo Flux Powder safety data sheet (SDS) from Silmid today.Once you have logged in or signed up, the datasheet will be visiblefor download if one is available.Please loginto access datasheets
Product Properties
Pack Size
500gm Pot
Brand
Easy-Flo
Manufacturer Name
Johnson Matthey
Specifications
Rolls Royce Spec
MSRR 9500
Please Note: Specifications and approvals are subject to change atany time. Users should always consult their AMM or the OEM whenselecting products to ensure items have the release needed. Onlyspecifications listed on the order confirmation will be certifiedon the Silmid CofC.
Product Information
Easy-flo Flux Powder is Johnson Mattheys leading brand brazingflux. It is sold widely throughout the world and is recognised asone of the best flux powders available. It is very fluid at thebottom end of its working range resulting in early and extensiveflux spread. This ensures that the joint surfaces are wellprotected from oxidation at the earliest possible joint of thebrazing operation. This high level of fluidity also helps to reduceflux voids / entrapment in the joint, the low viscosity of the fluxaiding its displacement by the brazing filler metal from the jointgap.
Easy-flo Flux Powder has a working range of 550-800°C. It issuitable for use with silver brazing filler metals melting below750°C (such as Silver-flo, Easy-flo and Argo-braze fillermetals).Easy-flo Flux Powder can be used on all of the commonengineering materials (copper, brass, mild steel and stainlesssteel), but not aluminium. JM special purpose fluxes are requiredwhen brazing aluminium bronze, certain grades of stainless steel,tungsten, molybdenum and tungsten carbide or where protractedheating is involved.
Easy-flo Flux Powder has excellent hot rodding characteristics andadheres well to a warmed brazing rod allowing flux to betransferred to the joint area via the rod. This characteristic hasmade Easy-flo Flux Powder very popular in hand brazing operationswhere the time to produce a brazed component is crucial.
Features:
Working range of 550°C - 800 °C
Classified as FH10 to EN1045
Ideal for use with silver brazing filler metals such asSilver-flo 55 and Silver-flo 40
Excellent hot rodding characteristics
