VCEFCMG551H401MO电磁阀ASCO现货现货现货

ASCOVCEFCMG551H401MO隔爆电磁阀可直接安装多款NAMUR安装要求的气动执行器上，安装简单实用，1/4气管接口，单双电控可满足不同的实用场合，具有气流jingque转换，动作迅速可靠，长期运行无故障等优点。ASCOVCEFCMG551H401MO explosion-proof solenoid valve can be directlyinstalled on a variety of pneumatic actuators required by NAMURinstallation. The installation is simple and practical, 1/4 tracheainterface, single and double electric control can meet differentpractical occasions. Long-term operation without failure and otheradvantages

接口:          ISO228/1 G1/4
环境温度      -20~+60℃
介质          经过过滤50微米，润滑或非润滑的压缩空气
换向时间      约40毫秒
安装          符号NAMUR标准和VDI/VDE3845双孔
标准电压      24VDC,24VAC50HZ,110VAC50HZ,220VAC50HZ
电压偏差  ±%10
功耗          标准线圈：AC启动功率6VA，稳定功率4.3VA
DC启动功率3W，稳定功率2.6W
工作方式       ED(DB)连接工作
防护等级       IP65符合DIN40050的正确安装边接器
电气接口       PG9连接
防爆等级：     可选防爆型 EX m II BT4、EX d II BT4

Interface: ISO228 / 1 G1 / 4
Ambient temperature -20 ~ + 60 ℃
Media 50 micron filtered, lubricated or non-lubricated compressedair
Commutation time about 40 ms
Installation Symbol NAMUR standard and VDI / VDE3845 doublehole
Standard voltage 24VDC, 24VAC50HZ, 110VAC50HZ, 220VAC50HZ
Voltage deviation ±% 10
Power consumption Standard coil: AC starting power 6VA, stablepower 4.3VA
DC starting power 3W, stable power 2.6W
Working mode  ED (DB) connection work
Degree of protection IP65 in accordance with DIN40050 correctlyinstalled side connector
Electrical interface PG9 connection
Explosion-proof grade: optional explosion-proof EX m II BT4, EX dII BT4