西门子6FX3502-7DD01-1AD0 SH20/SH30/SH40电机的混合连接器电缆

6FX3502-7DD01-1AD0 3米/307元、6FX3502-7DD01-1AF05米/359元、6FX3502-7DD01-1AH0 7米/414元、6FX3502-7DD01-1BA010米/468元、6FX3502-7DD01-1BF0 15米/574元、6FX3502-7DD01-1CA020米/679元、6FX3502-7DD01-1DA0 30米/809元、驱动端含抱闸线，预装双电缆4x0.75+2x0.38/3x2x0.25 适用于电机 S-1FL2 SH20/30/40(S200)，MOTION-CONNECT 350 长度(m)=3m Dmax 功率=7.5mm Dmax 编码器=7.0mm带制动器，驱动端出口 1 百万次弯曲

概述

The SIMATIC MICRO-DRIVE servo drive system is comprised of the maincomponents

• PDC Drives

• TM Drives

• Motor or geared motor

• Plug-in cables

In addition, other system components are also available, e.g. abrake control module (available soon) or shielding bracketsets.

Component selection and dimensioning of the right components basedon physical key data, travel profiles and/or load profiles can bedone directly in the "download" file of the TIA Selection Tool:

www.siemens.com/tst

Properties

• DC supply voltage for logic (24 V DC) and power (up to48 V DC)

• Different performance classes from 100 W to 1000 W forservo converters/PDC drive controllers, and 280 W forF-TM ServoDrive

• Communication via PROFINET with PROFIdrive profiles

• Failsafe communication via PROFIsafe for the failsafe variants(e.g. PDC100F)

• Extended Safety drive functions (e.g. SLS orSLT 1))for the failsafe variants already possible with the encodersintegrated in the motors)

• 24/48 V DC EC motors/geared motors (brushless) frommultiple Siemens Product Partners, can also be partially ordereddirectly via Siemens

• 24/48 V DC DC motors (with brushes) can also beoperated with PDC100 and PDC100F

• Pre-assembled plug-in cables from multiple Siemens ProductPartners, also can be partially ordered directly via Siemens

1) Only for PDC100F.

More information