中国西门子以太网电缆代理商

中国西门子以太网电缆代理商中国西门子以太网电缆代理商概述Motors/gear units and connection systems from Siemens Product PartnersNoteSiemens Product Partners are third-party companies outside of Siemens AG and its associated companies. Information and descriptions of products from the Siemens Product Partners are non-binding and are the responsibility of the Siemens Product Partner. These products are independently manufactured by the respective, responsible Siemens Product Partner and are sold and delivered by said partner according to its business and delivery terms.Insofar as it is not compulsory by law, Siemens assumes no liability or warranty for these products or for the connection to these products of the Siemens Product Partners. Please also note the information on the exclusion of liability/use of hyperlinks (see More information).Motors/gear unitsMotor from ebm-papst and motor from DunkermotorenFully compatible motors and geared motors for SIMATIC MICRO-DRIVEFrom the portfolios of the Siemens Product Partners1)Dunkermotoren and ebm-papstVarious combinations are available with the following components:MotorPlanetary gearboxHall-effect sensorsEncoder (incremental encoder)Optionally with holding brakeIndividual motor-gearbox combinations for the quick configuration during the bidding phase (not for series purchasing) can be ordered via the Siemens Industry MallComplete sets can be ordered via the web shops of the Siemens Product Partners:https://www.dunkermotoren.com/simatic-micro-drivehttps://idt-config.ebmpapst.com/simatic-micro-driveDelivery time of preferred typesPreferred types are components from Siemens Product Partners that will be shipped within 5 work days.The shipping time must be added to the delivery time. Availability of the individual components is a prerequisite.1) Information on the Siemens Product Partners: https://www.siemens.com/productpartnerConnection systemP_D211_XX_00541KnorrTec plug-in cable for SIMATIC MICRO-DRIVEFully compatible plug-in cables for SIMATIC MICRO-DRIVEFrom the portfolios of the Siemens Product Partners1)HARTING and KnorrTecPre-assembled at both endsDifferent versions available for different requirementsIndividual cable lengths for the quick configuration during the bidding phase (not for series purchasing) can be ordered via the Siemens Industry MallComplete sets can be ordered via the web shops of the Siemens Product Partners:https://www.harting.com/US/en/solutions/siemens-product-partner-simatic-micro-drivehttps://www.knorrtec.de/eshop.php?seourl=simatic_micro-drive.html&s_language=english1) Information on the Siemens Product Partners: https://www.siemens.com/productpartnerPPP plug-in cables for SIMATIC MICRO-DRIVE as of V1.0In the following you will find an overview of all the plug-in cables that are required between the PDC Drives and the motors or geared motors:Plug-in cables for motors from ebm-papstMotor sizeMotor powerWMotor connectorSizeDrive controllerPDC100/PDC100FPDC600/PDC600F/PDC1000 V1F-TM ServoDrive STF-TM ServoDrive HFFor 48 V DCPDC connectorWeidmüller, smallPhönix, largeECI42.2046M12LAiO2LAiO20CSD_LAiO2ECI42.4092M12LAiO2LAiO20CSD_LAiO2ECI63.20150M12LAiO2LAiO20CSD_LAiO2ECI63.40280M12LAiO2LAiO20CSD_LAiO2ECI63.60370M12LAiO2LAiO20CSD_LAiO2ECI80.40503M23-LPMo3-ECI80.60754M23-LPMo3-Plug-in encoder cable-LPEn2-Plug-in brake cableLPBr2LPBr2LPBr2Plug-in cables for Dunkermotoren motorsMotor sizeMotor powerWMotor connectorSizeDrive controllerPDC100/PDC100FPDC600/PDC600F/PDC1000 V1F-TM ServoDrive STF-TM ServoDrive HFFor 40 V DCPDC connectorWeidmüller, smallPhönix, largeBG45x3090M16LAiO1LAiO10CSD_LAiO1BG65Sx50186M16LAiO1LAiO10CSD_LAiO1BG75x50400M17-LPMo1-For 48 V DCBG95x40717M23-LPMo3-BG95x801109M23-LPMo3-Plug-in encoder cable-LPEn1-Plug-in brake cableLPBr1LPBr1LPBr1LegendLAiOx = all-in-one connecting cable, single-cable system (all signals in one plug-in cable, motor phases, Hall-effect sensor, incremental encoders, power supplies)LPMox = plug-in motor cableLPEnx = plug-in encoder cableLPBrx = plug-in brake cable更多信息NoteExclusion of liability/use of hyperlinksSiemens has composed this description with great care. However, it is not possible for Siemens to perform a check of the completeness, correctness and up-to-datedness of the data provided by Siemens Product Partners. Therefore, it cannot be ruled out that individual data may be incorrect, incomplete, or not up-to-date. Siemens does not assume any liability in this case, nor for the usability of the data or of the product for the user, unless the liability is compulsory by law.This document contains addresses of third-party web pages. Siemens accepts no responsibility for the contents of these web sites, nor does Siemens adopt these web sites and their contents as its own, as Siemens cannot check the information presented there and is also not responsible for the content and information provided on them. The user uses these web sites at his own risk.