免处理LDPE油墨LDPE免处理油墨

一承印物:HDPE高密度PE,PP,PE,LDPE低密度PE等材质.

产品举例:竞技场板,冰球板,瓶盖,汽车油箱,折叠椅和桌子,安全帽,呼啦圈,水管,胶箱,周转箱,瓶子.

二产品特性:印刷前产品需火焰处理,对已处理HDPE高密度PE,PP,PE,LDPE低密度PE等材质有超强附着力,适用于UV丝印.

三使用方法:

1可直接使用.

2在印刷过程中感觉油墨太浓可加适量专用稀释剂后使用.

3印好的产品需用UV紫外线光固,金属卤素灯120w/cm,1灯,焦点距离10cm,传送速度20m/min.

350网目/inch以上,溶胶厚10μm以下的PET版.印刷面积约70～90㎡/kg.

四注意事项:

以上是以我司的测试结果,谨供参考.量产前务必在贵司的条件下,测试为盼.

五产品包装:1kg/罐.

A substrate: HDPE high density PE, PP, PE, LDPE low density PEand other materials.

Examples are: Arena board, ice hockey board, bottle cap,automobile fuel tank, folding chair and table, safety helmet, hulahoop, water pipe, glue box, turnover box, bottle.

Two product characteristics: before printing products need flametreatment, have high adhesion to processed HDPE high density PE,PP, PE, LDPE low density PE and other materials, suitable for UVscreen printing.

Three methods of use:

1 can be used directly.

2 in the printing process, feel that the ink is too strong, addproper amount of special thinner.

3 printed products need UV UV light, metal halogen lamp 120w/cm,1 lights, focus distance 10cm, transmission speed 20m/min.

350 mesh size /inch above, PET thickness below 10 m, printingarea of 70~90 /kg.

Four matters of attention:

The above is based on our test results, for your reference. Wemust test again under the conditions of your company before massproduction.

Five product packaging: 1kg/ cans.