353B16+002P10组合一套
353B16+002P10三米白色线缆
High frequency, quartz shear ICP® accel., 10 mV/g, 1 to 10k Hz,5-44 top conn.
Sensitivity: (±10%) 10 mV/g(1.02 mV/(m/s²))
Measurement Range: ±500 g pk(±4905 m/s² pk)
Broadband Resolution: (1 to 10000 Hz) 0.005 g rms(0.05 m/s²rms)
Frequency Range: (±5%) 1 to 10000 Hz
Sensing Element: Quartz
Weight: 0.05 oz(1.5 gm)
All specifications are at room temperature unless otherwisespecified.
ProductNotes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically <= 3%.
[4] See PCB Declaration of Conformance PS023 for details.
Accessories:
| Supplied | |||
| 080A109 | Petro Wax | (1) | |
| 080A15 | Adhesive Mounting Base | (1) | |
| ACS-1 | NIST traceable frequency response(10 Hz to upper 5% point). | (1) | |
OptionalVersions:
(A) Adhesive Mount
| Accessories: | |||
| 080A90 | Quick Bonding Gel | (1) | |
(B) Low bias electronics
| ENGLISH | SI | |
| Output Bias Voltage | 4.5 to 7.5 VDC | |
| Excitation Voltage | 12 to 30 VDC | |
| Constant Current Excitation | 1 to 20 mA | |
| Measurement Range | 300 g pk | 2943 m/s² pk |
(J) Ground Isolated
| ENGLISH | SI | |
| Frequency Range | 1 to 8000 Hz | |
| Frequency Range | 0.7 to 15000 Hz | |
| Resonant Frequency | 56 kHz | |
| Electrical Isolation | ≥100000000 Ohm | |
| Size - Hex | 3/8 in | |
| Size - Height | 0.76 in | 19.3 mm |
| Weight | 0.09 oz | 2.7 gm |
(M) Metric Mount
| ENGLISH | SI | |
| Mounting Thread | M3 x 0.50 Male | |
| Accessories: | |||
| M080A15 | Adhesive Mounting Base | (1) | |
(Q) Extended discharge time constant
| ENGLISH | SI | |
| Discharge Time Constant | ≥5 sec | |
| Frequency Range | 0.15 to 10000 Hz | |
| Frequency Range | 0.1 to 20000 Hz | |
| Settling Time | <45 sec | |
| Accessories: | |||
| ACS-97 | Accessory for Vibration Division Product | (1) | |
(W) Water Resistant Cable
| ENGLISH | SI | |
| Electrical Connection Position | Top | |
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Sensitivity (±10 %) | 10 mV/g | 1.02 mV/(m/s²) | |
| Measurement Range | ±500 g pk | ±4905 m/s² pk | |
| Frequency Range (±5 %) | 1 to 10000 Hz | 1 to 10000 Hz | |
| Frequency Range (±10 %) | 0.7 to 20000 Hz | 0.7 to 20000 Hz | |
| Frequency Range (±3 dB) | 0.35 to 30000 Hz | 0.35 to 30000 Hz | |
| Resonant Frequency | ≥70 kHz | ≥70 kHz | |
| Broadband Resolution (1 to 10000 Hz) | 0.005 g rms | 0.05 m/s² rms | [2] |
| Non-Linearity | ≤1 % | ≤1 % | [1] |
| Transverse Sensitivity | ≤5 % | ≤5 % | [3] |
| Environmental | |||
| Overload Limit (Shock) | ±10000 g pk | ±98100 m/s² pk | |
| Temperature Range (Operating) | -65 to +250 °F | -54 to +121 °C | |
| Temperature Response | See Graph %/°F | See Graph %/°F | [2] |
| Base Strain Sensitivity | ≤0.002 g/µε | ≤0.02 (m/s²)/µε | [2] |
| Electrical | |||
| Excitation Voltage | 18 to 30 VDC | 18 to 30 VDC | |
| Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
| Output Impedance | ≤100 Ohm | ≤100 Ohm | |
| Output Bias Voltage | 8 to 12 VDC | 8 to 12 VDC | |
| Discharge Time Constant | 0.5 to 2.0 sec | 0.5 to 2.0 sec | |
| Settling Time (within 10% of bias) | <5 | <5 | |
| Spectral Noise (1 Hz) | 2800 µg/√Hz | 27468 (µm/sec2)/√Hz | [2] |
| Spectral Noise (10 Hz) | 700 µg/√Hz | 6867 (µm/sec2)/√Hz | [2] |
| Spectral Noise (100 Hz) | 180 µg/√Hz | 1766 (µm/sec2)/√Hz | [2] |
| Spectral Noise (1 kHz) | 64 µg/√Hz | 628 (µm/sec2)/√Hz | [2] |
| Physical | |||
| Size - Height | 0.68 in | 17.3 mm | |
| Weight | 0.05 oz | 1.5 gm | [2] |
| Sensing Element | Quartz | Quartz | |
| Size - Hex | 9/32 in | 9/32 in | |
| Sensing Geometry | Shear | Shear | |
| Housing Material | Titanium | Titanium | |
| Sealing | Welded Hermetic | Welded Hermetic | |
| Electrical Connector | 5-44 Coaxial | 5-44 Coaxial | |
| Electrical Connection Position | Top | Top | |
| Mounting Thread | 5-40 Male | 5-40 Male | |
| Mounting Torque | 8 to 12 in-lb | 90 to 135 N-cm | |
