Door Control Systems for Elevators
See the following PDF for anoverview of elevator door controls
优势
1-button operation for the entire commissioning process
Optimum and stable drive characteristics
Reduced service requirements and costs
SIDOOR User Software (part of the Software Kit, notincluded in the scope of delivery, see "Additional units") enablesuser-friendly operation and detailed diagnostics.
Integrated terminal module enables simple setup and diagnosticsvia an event and statistics memory
Integrated relay module for the "OPEN" position, "CLOSED"position and "Reversing" functions.
Small footprint thanks to compact design
Automated functions for enhanced safety
应用
The elevator door drive is comprised of a controller and themaintenance-free drive unit, geared motor or gearless EC technologydirect drive motor.
Controllers are electronic controllers connected to the powersupply either via an internal power supply unit (SIDOOR AT12) orvia an external power supply unit (SIDOOR NT40 orSIDOOR Transformer). They are generally connected to thehigher-level controller via digital or fieldbus interfaces, and canbe configured via a user interface.
The SIDOOR AT12, SIDOOR AT40 and SIDOOR ATE500E controllers can beused to operate horizontally operated cabin and shaft doors atadjustable speeds and accelerations.
The SIDOOR ATD400V controller for rising doors and rollingshutters enables the operation of vertical door systems onelevators at adjustable speeds and accelerations.
Geared motors form the maintenance-free drive unit in the doordrive. The geared motors feature DC motors with non-self-lockinggearing, and are speed-controlled. The set force and speed limitsare not exceeded. The gearless motor (direct drive) is themaintenance-free drive unit of the door drive.
Operation of the named door drives does not require limit switches.The door width and the "OPEN"/"CLOSE" positions are determinedautomatically.
The power is transmitted by a toothed belt. The toothed belt passesover a deflector pulley and can be fitted with 2 door clutchholders. This enables it to drive both one-sided andcentrally-opening doors. The accessories are not included in thescope of supply, see "Additional units".
| 6AV6644-0AC01-2AX0 | MP377-19 触摸式面板，19寸64K色中文 |
| 6AV6644-0BA01-2AX1 | MP377-12 按键式面板,12寸64K色中文显示 |
| 6AV6671-1CB00-0AX2 | MMC 存储卡 128 MB 用于 OP77B, OP/TP 177B, MOBILE PANEL 177 |
| 6ES7 648-0DC20-0AA0 | USB stick 512M |
| 6ES7 648-0DC30-0AA0 | USB stick 1G |
| 6ES7 648-0DC40-0AA0 | USB stick 2G |
| 6AV6647-0AA11-3AX0 | SIMATIC KTP400 Basic mono PN 3.8"mono STN 显示屏，以太网接口 |
| 6AV6647-0AB11-3AX0 | SIMATIC KTP600 Basic color PN 5,7"TFT 显示屏，256 色以太网接口 |
| 6AV6647-0AD11-3AX0 | SIMATIC KTP600 Basic color PN 5,7" TFT 显示屏，256 色以太网接口 |
| 6AV6647-0AE11-3AX0 | SIMATIC KTP1000 基本色 DP 10.4" TFT 显示器，256 色 MPI/PROFIBUS DP接口， WINCC FLEXIBLE 2008 精简版，包括免费提供的开源软件，更多详情参见光盘。 |
| 6AV6647-0AF11-3AX0 | SIMATIC KTP1000 基本色 PN 10,4" TFT 显示器，256 色，以太网接口，WINCCFLEXIBLE 2008 精简版，包括免费提供的开源软件，更多详情参见光盘。 |
| 6AV2123-2MB03-0AX0 | KTP1200 BASIC |
| 6AV6647-0AG11-3AX0 | SIMATIC TP1500 基本色 PN 15.0" TFT 显示器，256 色，以太网接口，WINCCFLEXIBLE 2008 精简版，包括免费提供的开源软件，更多详情参见光盘。 |
| 6AV6648-0BC11-3AX0 | Smart 700 |
| 6AV6648-0BE11-3AX0 | Smart 1000 |
| 6AV2124-2DC01-0AX0 | KTP400 舒适型 |
| 触摸式面板 | |
| 6AV2124-0GC01-0AX0 | TP700 舒适型 |
| 6AV2124-0JC01-0AX0 | TP900 舒适型 |
| 6AV2124-0MC01-0AX0 | TP1200 舒适型 |
| 6AV2124-0QC02-0AX0 | TP1500 舒适型 |
| 6AV2124-0UC02-0AX0 | TP1900 舒适型 |
| 6AV2124-0XC02-0AX0 | TP2200 舒适型 |
| 按键 | |
| 6AV2124-1DC01-0AX0 | KP400 舒适型 |
| 6AV2124-1GC01-0AX0 | KP700 舒适型 |
| 6AV2124-1JC01-0AX0 | KP900 舒适型 |
| 6AV2124-1MC01-0AX0 | KP1200 舒适型 |
| 6AV2124-1QC02-0AX0 | KP1500 舒适型 |
The products described here (interfaces and tools) support economiccooperation between SIMATIC PCS 7 including SIMATIC BATCH andthe following plant information management systems (PIMS):
PI‑System from OSIsoft (PI PCS 7-CONNECT)
aspenOne from AspenTech (aspenOne PCS 7-CONNECT)
A plant information management system is suitable for:
Short-term and long-term archiving beyond the limits ofcompanies and plants
Evaluation and presentation of process and production data
The interfaces and tools provide the best possible combination ofPI‑System and aspenOne with SIMATIC PCS 7. They feature highflexibility, performance and safety. They also support redundantsystems and archive recovery concepts, e.g. in the event ofinterferences in a connection.
We can additionally offer tailored, scalable support and servicesfor efficient implementation and maintenance of these interfacesand tools. Information on support and services as well asmanufacturer declarations are available on request (for contactaddress, see "Further information").
功能
PI-PCS 7-CONNECTInterface PI‑CONNECTOPC+
PI-CONNECT OPC+ reads the process variables cyclically from SIMATICPCS 7 and saves these in the PI long-term archive.
The interface is operated on a separate interface PC on theterminal bus of the SIMATIC PCS 7 process control system, andsupports:
Redundancy functionality of the SIMATIC PCS 7 OS server
Concurrent time stamp treatment
Archive recovery
Failover online
The PI-CONNECT OPC+ interface can be used in combination withSIMATIC PCS 7 V8.x and V9.0. It can use the followinginterfaces for communication with SIMATIC PCS 7:
OpenPCS 7 interface
OPC DA and OPC HDA interface (OPC UA inpreparation)