2508-01A3122-03A旋转力矩传感器
Model: 2508-01A
PCB L&T Reaction Torque Transducer, 50 in-lb/4.2 ft-lb (5.6N-m) rated capacity, 50% static overload protection, 2-in (50.8 mm)Steel Flange
Measurement Range: 50 lbf-in (5.65 Nm)
Sensitivity: 2 mV/V (2 mV/V)
Mounting: Flange (#10-24 Bolts) (Flange (No Metric Equivalent))
Size - Diameter: 2.0 in (50.8 mm)
Size - Length: 3.0 in (76.2 mm)
Torsional Stiffness: 2350 lbf-in/radian (265.5 N-m/radian)
English: | SI: | ||
---|---|---|---|
Performance | |||
Measurement Range (Full ScaleCapacity) | 50 lbf-in | 5.65 Nm | |
Sensitivity (output at rated capacity) | 2 mV/V | 2 mV/V | [1][2] |
Non-Linearity | ≤0.10 % FS | ≤0.10 % FS | [2] |
Hysteresis | ≤0.10 % FS | ≤0.10 % FS | [2] |
Non-Repeatability | ≤0.02 % FS | ≤0.02 % FS | [2] |
Resonant Frequency | 380 Hz | 380 Hz | |
Maximum Torque | 75 lbf-in | 8.47 Nm | |
Environmental | |||
Overload Limit (Axial Thrust) | 200 lbf | 890 N | [3] |
Overload Limit (Overhung Moment) | 50 lbf-in | 5.65 Nm | [3] |
Overload Limit (Shear) | 13 lbf | 57.8 N | [3] |
Temperature Range (Operating) | -65 to +200 °F | -54 to +93 °C | |
Temperature Range (Compensated) | +70 to +170 °F | +21 to +77 °C | |
Temperature Effect on Output (Maximum) | ±0.002 %Reading/°F | ±0.0036 %Reading/°C | [4] |
Temperature Effect on Zero Balance(Maximum) | ±0.002 %FS/°F | ±0.0036 %FS/°C | [2][4] |
Electrical | |||
Bridge Resistance | 700 Ohm | 700 Ohm | |
Excitation Voltage (Recommended) | 10 VDC | 10 VDC | [5] |
Insulation Resistance | 5 GOhm | 5 GOhm | |
Zero Balance | ≤1.0 %RO | ≤1.0 %RO | |
Output Polarity | cw+ | cw+ | |
Physical | |||
Size - Diameter | 2.0 in | 50.8 mm | [6] |
Size - Length | 3.0 in | 76.2 mm | [6] |
Weight | 2.0 lb | 908 g | |
Mounting | Flange (#10-24 Bolts) | Flange (No Metric Equivalent) | |
Torsional Stiffness | 2350 lbf-in/radian | 265.5 N-m/radian | |
Sensing Element | Strain Gage | Strain Gage | |
Housing Material (Sensor) | Anodized Aluminum | Anodized Aluminum | |
Electrical Connector | PT02E-10-6P | PT02E-10-6P |
旋转扭矩传感器(单花键轴式) | ||||||||
型号 | 量程 (N-m) | zui大速度 RPM | 过载能力 | 抗扭刚度 (N-m/rad) | 旋转惯性 (N-m/s2) | 温度范围 ℃ | 重量 kg | |
4115A系列 | ||||||||
4115A-01A | 5.6 | 15 k | 17 | 500 | 0.0005 | -54— +107 | 20.9 | |
4115A-02A | 11 | 34 | 1525 | |||||
4115A-03A | 23 | 68 | 3725 | |||||
4115A-04A | 55 | 170 | 10.6 k | 0.0006 | ||||
4115A-05A | 115 | |||||||
4115K系列 | ||||||||
4115K-01A | 21.3 | |||||||
4115K-02A | ||||||||
4115K-03A | ||||||||
4115K-04A | ||||||||
4115K-05A | 200 | 13.6 k | ||||||
4115K-06A | 340 | 23 k | ||||||
4115K-07A | 135 | 405 | ||||||
4115K-08A | 225 | 675 | ||||||
4115K-09A | 270 | 815 | 42.9 k | |||||
4115K-10A | 450 | 1220 | 47.5 k | 0.0007 | ||||
4115K-11A | 565 | 1700 | 56.5 k | |||||
4115K-12A | ||||||||
4115K-13A | 1130 | |||||||
注: | ||||||||
1. 灵敏度: 2.5 mV/V 2. 非线性度: ≤0.05% FS 3. 滞后性: ≤0.05% FS 4. 非重复性: ≤0.03% FS 5. 花键压力角30°,4115A系列为16齿,4115K系列为24齿,其他指标见尺寸图 | 6. 桥阻: 350 ohm 7. 谐振频率: 3.28 k Hz 8. 接头形式: MS3102A-14S-5P 9. |