Noryl* GFN1720 is a 20% glass fiber reinforced, injectionmoldable grade. This modified polyphenylene ether resin is designedto deliver a balance of heat, strength and electrical properties.Noryl GFN1720 is available in multiple colors and may be anexcellent material candidate for ignition coils, bobbins and otherapplication requiring electrically insulating properties.
SABIC Innovative Plastics NORYL GFN1720
物理性能额定值 (公制)额定值 (英制)测试方法
比重1.24 g/cc1.24 g/ccASTM D792密度1.24 g/cc0.0448 lb/in3ISO1183水分吸收0.0600 %0.0600 %23°C / 50% RH; ISO 62饱和吸水率0.15 %0.15 %ISO62线性成型收缩率,Flow0.0020 - 0.0040 cm/cm0.0020 - 0.0040 in/inon TensileBar; SABIC Method
0.0020 - 0.0040 cm/cm
@Thickness 3.20 mm
0.0020 - 0.0040 in/in@Thickness 0.126 in
SABIC Method熔体流动速率4.5 g/10 min@Load 5.00 kg, Temperature 300 °C
4.5 g/10 min@Load 11.0 lb, Temperature 572 °F
ASTM D1238化合物熔体指数11 g/10 min@Load 10.0 kg, Temperature 300 °C
11 g/10 min@Load 22.0 lb, Temperature 572 °F
MVR [cm^3/10 min]; ISO 1133机械性能额定值 (公制)额定值 (英制)测试方法
硬度，H358/30100 MPa14500 psiISO 2039-1抗张强度(断裂)90.0 MPa13100 psiTypeI, 5 mm/min; ASTM D638
90.0 MPa13100 psi5 mm/min; ISO 527抗张强度(屈服)90.0 MPa13100 psiType I,5 mm/min; ASTM D638
90.0 MPa13100 psi5 mm/min; ISO 527伸长率 (断裂)2.0 %2.0 %5 mm/min; ISO527
3.0 %3.0 %Type I, 5 mm/min; ASTM D638屈服伸长率2.0 %2.0 %5 mm/min; ISO527
2.5 %2.5 %Type I, 5 mm/min; ASTM D638拉伸模量5.50 GPa798 ksi5 mm/min;ASTM D638
6.00 GPa870 ksi1 mm/min; ISO 527弯曲强度135 MPa19600 psi2 mm/min; ISO178
145 MPa21000 psi1.3 mm/min, 50 mm span; ASTM D790弯曲模量4.50 GPa653ksi2 mm/min; ISO 178
4.80 GPa696 ksi1.3 mm/min, 50 mm span; ASTM D790悬壁梁缺口冲击强度0.600J/cm1.12 ft-lb/inASTM D256
0.500 J/cm
@Temperature -30.0 °C
0.937 ft-lb/in@Temperature -22.0 °F
ASTM D256悬壁梁无缺口冲击强度25.0 kJ/m211.9 ft-lb/in280*10*4; ISO 180/1U25.0 kJ/m2
@Temperature -30.0 °C
11.9 ft-lb/in2@Temperature -22.0 °F
80*10*4; ISO 180/1U简支梁无缺口冲击强度2.50 J/cm211.9 ft-lb/in2Edgew 80*10*4sp=62mm; ISO 179/1eU2.50 J/cm2
@Temperature -30.0 °C
Edgew 80*10*4 sp=62mm; ISO 179/1eU落锤总能量14.0 J@Temperature 23.0 °C
10.3 ft-lb@Temperature 73.4 °F
ASTM D3763泰伯磨损，毫克/1000次4545CS-17, 1 kg; SABIC Method电气性能额定值 (公制)额定值 (英制)测试方法
体积电阻率1.00e+15 ohm-cm1.00e+15 ohm-cmIEC 60093表面电阻>= 1.00e+15ohm>= 1.00e+15 ohmROA; IEC 60093介电常数2.6
@Frequency 1.00e+6 Hz
2.6@Frequency 1.00e+6 Hz
IEC 602502.7
@Frequency 50.0 - 60.0 Hz
2.7@Frequency 50.0 - 60.0 Hz
IEC 60250介电强度16.0 kV/mm@Thickness 3.20 mm
406 kV/in@Thickness 0.126 in
in oil; IEC 60243-126.0 kV/mm
@Thickness 1.60 mm
660 kV/in@Thickness 0.0630 in
in oil; IEC 60243-130.0 kV/mm
@Thickness 0.800 mm
762 kV/in@Thickness 0.0315 in
in oil; IEC 60243-1耗散因数0.0020@Frequency 1.00e+6 Hz
0.0020@Frequency 1.00e+6 Hz
IEC 602500.0060
@Frequency 50.0 - 60.0 Hz
0.0060@Frequency 50.0 - 60.0 Hz
IEC 60250相比耐漏电起痕指数(CTI)200 V200 VIEC 60112热性能额定值 (公制)额定值 (英制)测试方法
线形热膨胀系数 - 流动30.0 μm/m-°C
@Temperature 23.0 - 80.0 °C
16.7 μin/in-°F@Temperature 73.4 - 176 °F
ISO 11359-240.0 μm/m-°C
@Temperature -40.0 - 40.0 °C
22.2 μin/in-°F@Temperature -40.0 - 104 °F
ASTM E 831线性热膨胀系数,横向流动50.0 μm/m-°C@Temperature -40.0 - 40.0 °C
27.8 μin/in-°F@Temperature -40.0 - 104 °F
ASTM E 83170.0 μm/m-°C
@Temperature 23.0 - 80.0 °C
38.9 μin/in-°F@Temperature 73.4 - 176 °F
ISO 11359-2导热系数0.260 W/m-K1.80 BTU-in/hr-ft2-°FISO 8302Hot BallPressure Test<= 165 °C<= 329 °FIEC 60695-10-2载荷下热变形温度(0.46MPa)170 °C338 °FEdgew 120*10*4 sp=100mm; ISO 75/Be载荷下热变形温度(1.8MPa)160 °C320 °FEdgew 120*10*4 sp=100mm; ISO 75/Ae171 °C
@Thickness 3.20 mm
340 °F@Thickness 0.126 in
unannealed; ASTM D648维卡软化温度170 °C338 °FRate B/50; ISO 306180 °C356 °FRate B/120; ISO 306
180 °C356 °FRate A/50; ISO 306
181 °C358 °FRate B/50; ASTM D1525UL RTI65.0 °C149 °FUL 746BULRTI，机械冲击65.0 °C149 °FUL 746BUL RTI，机械无冲击65.0 °C149 °FUL746B可燃性(UL94)HB
@Thickness 1.50 mm
HB@Thickness 0.0591 in
UL 94HB
@Thickness 3.00 mm
HB@Thickness 0.118 in
UL 94极限氧指数23 %23 %ISO 4589灼热丝试验960 °C@Thickness 3.20 mm
1760 °F@Thickness 0.126 in
IEC 60695-2-12材料描述 测试方法
Ball Pressure Test, 125?°C +/- 2?°CPASSESIEC 60695-10-2
