1380-02A/1381-04A荷载传感器现货出售
1380-02A
PCB L&T Rod End Load Cell, 1,000 lbf (4.4 kN) rated capacity,50% static overload protection, 3/4-16 male & female thread,aluminum construction
Measurement Range: 1000 lbf (4448 N)
Size - Diameter: 1.50 in (38.1 mm)
Size - Height: 4.25 in (107.9 mm)
Electrical Connector: PT02E-10-6P
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Measurement Range | 1000 lbf | 4448 N | [1] |
| Sensitivity (±10 %) | 2 mV/V | 2 mV/V | [2] |
| Non-Linearity | ≤0.25 % FS | ≤0.25 % FS | |
| Hysteresis | ≤0.15 % FS | ≤0.15 % FS | |
| Non-Repeatability | ≤0.05 %RO | ≤0.05 %RO | |
| Resonant Frequency | 10 kHz | 10 kHz | |
| Environmental | |||
| Overload Limit | 1500 lbf | 6672 N | |
| Load Limit (Side Force, FX orFY) | 250 lbf | 1112 N | [3] |
| Load Limit (Bending Moment, MXor MY) | 750 inf-lb | 85 Nm | [3] |
| Load Limit (Axial Torque,MZ) | 650 inf-lb | 73 Nm | [3] |
| Temperature Range (Operating) | -20 to +200 °F | -28 to +93 °C | |
| Temperature Range (Compensated) | +70 to +170 °F | +21 to +77 °C | |
| Temperature Effect on Output (Maximum) | ±0.01 %Reading/°F | ±0.018 %Reading/°C | [4] |
| Temperature Effect on Zero Balance(Maximum) | ±0.005 %FS/°F | ±0.009 %FS/°C | [4] |
| Electrical | |||
| Bridge Resistance | 350 Ohm | 350 Ohm | [5] |
| Excitation Voltage (Recommended) | 10 VDC | 10 VDC | [6] |
| Insulation Resistance | >5000000000 Ohm | >5000000000 Ohm | |
| Zero Balance | ≤1 % FS | ≤1 % FS | |
| Output Polarity | Positive | Positive | |
| Output Polarity | +Tension | +Tension | |
| Physical | |||
| Size - Height | 4.25 in | 107.9 mm | [7] |
| Size - Diameter | 1.50 in | 38.1 mm | [7] |
| Weight | 0.5 lb | 227 g | |
| Mounting Thread | 3/4 - 16 Male | No Metric Equivalent | |
| Mounting Thread | 3/4 - 16 Female | No Metric Equivalent | |
| Cover Material | Anodized Aluminum | Anodized Aluminum | |
| Sensor Material | Anodized Aluminum | Anodized Aluminum | |
| Sensing Element | Strain Gage | Strain Gage | |
| Deflection at Full Scale Capacity | 0.0006 in | 0.015 mm | |
| Electrical Connector | PT02E-10-6P | PT02E-10-6P | |
1381-04A
Rod End Load Cell, 20k lbf (89 kN) rated capacity, 50% staticoverload protection, 1-14 male & female thread, steelconstruction
Measurement Range: 20 klbf (89 kN)
Size - Diameter: 1.50 in (38.1 mm)
Size - Height: 4.50 in (114.3 mm)
Electrical Connector: PT02E-10-6P
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Measurement Range | 20 klbf | 89 kN | [1] |
| Sensitivity (±10 %) | 2 mV/V | 2 mV/V | [2] |
| Non-Linearity | ≤0.25 % FS | ≤0.25 % FS | |
| Hysteresis | ≤0.15 % FS | ≤0.15 % FS | |
| Non-Repeatability | ≤0.05 %RO | ≤0.05 %RO | |
| Resonant Frequency | 15 kHz | 15 kHz | |
| Environmental | |||
| Overload Limit | 30 klbf | 133 kN | |
| Load Limit (Side Force, FX orFY) | 2400 lbf | 10.7 kN | [3] |
| Load Limit (Bending Moment, MXor MY) | 6500 inf-lb | 734 Nm | [3] |
| Load Limit (Axial Torque,MZ) | 7500 inf-lb | 847 Nm | [3] |
| Temperature Range (Operating) | -20 to +200 °F | -28 to +93 °C | |
| Temperature Range (Compensated) | +70 to +170 °F | +21 to +77 °C | |
| Temperature Effect on Output (Maximum) | ±0.01 %Reading/°F | ±0.018 %Reading/°C | [4] |
| Temperature Effect on Zero Balance(Maximum) | ±0.005 %FS/°F | ±0.009 %FS/°C | [4] |
| Electrical | |||
| Bridge Resistance | 350 Ohm | 350 Ohm | [5] |
| Excitation Voltage (Recommended) | 10 VDC | 10 VDC | [6] |
| Insulation Resistance | >5000000000 Ohm | >5000000000 Ohm | |
| Zero Balance | ≤1 % FS | ≤1 % FS | |
| Output Polarity | Positive | Positive | |
| Output Polarity | +Tension | +Tension | |
| Physical | |||
| Size - Height | 4.50 in | 114.3 mm | [7] |
| Size - Diameter | 1.50 in | 38.1 mm | [7] |
| Weight | 1.2 lb | 544 g | |
| Mounting Thread | 1 - 14 Male | No Metric Equivalent | |
| Mounting Thread | 1 - 14 Female | No Metric Equivalent | |
| Cover Material | Anodized Aluminum | Anodized Aluminum | |
| Sensing Element | Strain Gage | Strain Gage | |
| Deflection at Full Scale Capacity | 0.0012 in | 0.030 mm | |
| Electrical Connector | PT02E-10-6P | PT02E-10-6P | |
多通道采集各类物理信息，并以图形形式实时显示。记录数据支持导出txt，uff等格式以便其他软件做后处理。
功能：
a.通道支持AC,DC,ICP,TEDS耦合方式，兼容振动，噪声，动压，转速等传感器。
b.实时显示FFT频谱，传递函数，倍频程，能量趋势图，三位谱，实时积 分等。
c.多窗口多通道显示，可自定义各类显示格式。
d.设置X轴，Y轴单位，例如g,m/s2，mm/s2,m,mm,m/s,mm/s等。
e.后处理原始信号，例如截取，滤波，重采样，导出等，做计算如频谱，倍频，能量值，传递函数等。
产品运行过程：
建立项目-设置通道-检测信号-开始采集-记录数据-导出各类格式&后处理
软件示例：
