|PC上海拜耳|2858
德国科思创 PC 2258 医疗级 生物兼容 Makrolon详细介绍.
PC Makrolon产品类别型号特点用途概述
华韵PC德国拜耳2207流动速率37抗紫外线 汽车零件 电子电器
华韵PC德国拜耳2405流动速率20工业配件 汽车零件 电子电器
华韵PC德国拜耳2407流动速率20抗紫外线 汽车零件 电子电器
华韵PC德国拜耳2458流动速率20医疗护理用品 食品接触用品
华韵PC德国拜耳2605流动速率13工业配件 汽车零件 电子电器
华韵PC德国拜耳2805流动速率10工业配件 汽车零件 电子电器
华韵PC德国拜耳2807流动速率10抗紫外线 汽车零件 电子电器
华韵PC德国拜耳2858流动速率10食品级 医疗级 环氧乙烷消毒
华韵PC德国拜耳2865流动速率10阻燃V0 汽车零件 电子电器
华韵PC德国拜耳3105流动速率6.5抗紫外线 抗冲击 汽车零件
华韵PC德国拜耳3208流动速率5.5食品级 医疗级 环氧乙烷消毒
华韵PC德国拜耳6555流动速率10阻燃V0 汽车零件 电子电器
华韵PC德国拜耳6557流动速率10阻燃V0 抗紫外线 电子电器
华韵PC德国拜耳9415流动速率7阻燃V0 玻纤增强10%
华韵PC德国拜耳9425流动速率6阻燃V0 玻纤增强20%
华韵PC德国拜耳XT5010流动速率34低粘度 高流动
Huayun plastic componentspolycarbonate is a strong thermoplastic resin, its name comes fromits internal CO3 group. It can be synthesized from BISPHENOL A andcarbon oxychloride COCL2. The more commonly used method is the melttransesterification of BISPHENOL A and diphenyl carbonate throughtransesterification and polycondensation. The properties ofpolycarbonate PC is a polycarbonate of carbonic acid. Carbonic aciditself is not stable, but its derivatives such as phosgene, urea,carbonate, carbonic acid ester are stable. POLYCARBONATES can beclassified into aliphatic and aromatic groups according to theiralcohol structure. Aliphatic polycarbonate. Such as poly (ethylenecarbonate) , poly (trimethylene carbonate) and their copolymers,which have low melting point and glass transition temperature, poorstrength and can not be used as structural materials, but takeadvantage of their Biocompatibility and biodegradable propertiesand can be used as drug slow release carriers, surgical suture,bone support materials and other applications. Polycarbonate isresistant to weak acid, weak alkali and neutral oil. Polycarbonateis not resistant to ultraviolet light and strong Alkali. PC is alinear carbonated polyester in which the carbonated groupsalternate with other groups, which may be aromatic, aliphatic orboth. Bisphenol a type PC is the most important industrial product.PC is an amorphous polymer of almost colorless glassy state withgood optical properties. Pc High Molecular Weight Resin has hightoughness, the notched impact strength of cantilever beam is 600 ~900J / m, the thermal deformation temperature of unfilled grade isabout 130 °c, the value can be increased by 10 °c after glass fiberreinforced. The bending modulus of PC can reach over 2400MPA, andthe resin can be processed into large rigid products. The creeprate under load is very low below 100 °C. PC poor hydrolysisresistance, can not be used for repeated exposure to high-pressuresteam products.