CircuitBreaker, Supplementary, Mini, C Curve, 15A, 1 Pole, Single Pkg,Screw
Manufacturer#: FAZ-C15/1-NA-SP
AlliedStock #: 70275981
Product Specifications
| Product Attribute | Attribute Value |
|---|---|
| Actuator Type | Toggle |
| Approvals | UL 489;CSA Std. C22.2 No.2350 |
| Characteristic | C Curve |
| Current Rating | 15 A |
| Height | 4.13 Inch |
| Length | .7 Inch |
| Mounting Type | DIN Rail Mount |
| Number of Poles | 1 Pole |
| Series | FAZ-NASeries |
| Standards | UL489 |
| Termination | Screws |
| Type | Thermal/Magnetic |
| Voltage Rating | 277 VAC ; 480 VAC |
Overview
Optimum product quality, tested reliability and safety stand forbest protection of personnel, installations and plant. Eaton’sFAZ-NA DIN rail mountable circuit breaker is designed for use inbranch service applications. The FAZ-NA Series is available with B,C and D characteristics in accordance with UL 489, CSA C22.2 No.5,UL 1077, CSA C22.2 No.235 and IEC 60947-2. These devices are CEmarked.
BroadRange of Tripping Curves:
B Characteristic for Standard Circuit Protection
C Characteristic for Higher Inrush Currents
D Characteristic for Inductive and Capacitive Loads
FeaturesRated Currents Up to 40A
DIN Rail Mount
Suitable for Branch Circuit Device Protection
Current Limiting Design
Fulfill UL489, CSA C22.2 No. 5 and IEC 60947-2
Optional Ring Tongue Connection
Module Width of Only 17.7 mm Per Pole
Reliable and Safe Operation
Captive Screws Cannot Be Lost
Snap-On Accessories
Contact Position Indicator
Finger Proof
Trip-Free Mechanism
Applications:Convenience Receptacle Circuits
Motor Control Circuits
Load Circuits Leaving the Equipment
HACR Internal/External Equipment
PLC I/O Points
Computers
Power Supplies
Control Instrumentation
Relays
UPS
Power Conditioners
