GuidelinesforuseAlready0.05%–0.1%ppmofIrganox1010providelong-termthermalsta-bilityto the polymer. Concentrations up to several percent may be useddepending on the substrate and the requirements of the endapplication. In polyolefins the concentration levels for Irganox1010 range between 0.05 % and 0.4 % depending on substrate,processing conditions and long-term thermal stability requirements.The optimum level has to be determined application specific.Concentration levels of Irganox 1010 in hot melt adhe- sives rangefrom 0.2 % to 1 %, in synthetic tackifier resins, Irganox 1010concentration ranges between 0.1 % and 0.5 %. Extensive performancedata of Irganox 1010 in variousorganic polymers and applicationsare available upon request.
PhysicalProperties Meltingrange: 110 –125 °C Flashpoint: 297°C
Density(20°C): 1.116g/ml
Vapor pressure(20°C): 7 E-10 Pa(extrapolated)
Bulk density:
Powder: 530 – 630g/l
FF: 480 – 570g/l
ED: 500 – 600g/l
Solubility(20°C) g/100 gsolution
Acetone 47
Chloroform 71
Ethanol 1.5
Ethylacetate 47
n-Hexane 0.3
Methanol 0.9
Methylenechloride 63
Health&Safety Irganox 1010 exhibits a very low order of oraltoxicity and does notpresentany abnormal problems in its handlingor general use.Detailed information on handling and any precautionsto be observed in the use of the product(s) described inthisleaflet can be found in our relevant health and safetyinformation sheet.
