B4300G6PBT-GF30注射成型,高流动,30%的玻璃纤维增强级;高刚性,尺寸稳定的强,应用如雨刷武器,印刷电路板PCB,游戏机等.
现货供应」PBT 德国巴斯夫 B2300G6 HR LS 30% 玻璃纤维增强材料
「现货供应」PBT 德国巴斯夫 B2520 工程/工业配件、汽车行业
「现货供应」PBT 德国巴斯夫 B2550 纺织/纤维、汽车行业 和 涂覆应用。
「现货供应」PBT 德国巴斯夫 B4030G6 30% 玻璃纤维增强材料
「现货供应」PBT 德国巴斯夫 B4040G10 50% 玻璃纤维增强材料
「现货供应」PBT 德国巴斯夫 B4300G10 50% 玻璃纤维增强材料
「现货供应」PBT 德国巴斯夫 B4300G2 10% 玻璃纤维增强材料
「现货供应」PBT 德国巴斯夫 B4300G3 15% 玻璃纤维增强材料
「现货供应」PBT 德国巴斯夫 B4300G4 20% 玻璃纤维增强材料
「现货供应」PBT 德国巴斯夫 B4300G6 30% 玻璃纤维增强材料
「现货供应」PBT 德国巴斯夫 B4300GM42 20%玻璃纤维增强材料
「现货供应」PBT 德国巴斯夫 B4300 K4 20% 玻璃珠
「现货供应」PBT 德国巴斯夫 B4300 K6 30% 玻璃珠
「现货供应」PBT 德国巴斯夫 B4300 M5 25% 矿物填料
「现货供应」PBT 德国巴斯夫 B4330G6 30% 玻璃纤维增强材料
「现货供应」PBT 德国巴斯夫 B4406 应用包括房屋、电气/电子应用
「现货供应」PBT 德国巴斯夫 B4406G2 10% 玻璃纤维增强材料
「现货供应」PBT 德国巴斯夫 B4406G3 15% 玻璃纤维增强材料
「现货供应」PBT 德国巴斯夫 B4406G4 20% 玻璃纤维增强材料
「现货供应」PBT 德国巴斯夫 B4406G6 30% 玻璃纤维增强材料
「现货供应」PBT 德国巴斯夫 B4441G5 25% 玻璃纤维增强材料
「现货供应」PBT 德国巴斯夫 B4450G5 25% 玻璃纤维增强材料
「现货供应」PBT 德国巴斯夫 B4500 应用包括 薄膜、水管/管道/饮用水
「现货供应」PBT 德国巴斯夫 B4500FC 符合REACH标准通过ROHS 认证
「现货供应」PBT 德国巴斯夫 B4520 中等粘度、
「现货供应」PBT 德国巴斯夫 B4560 符合REACH标准通过ROHS 认证
「现货供应」PBT 德国巴斯夫 B6550 高粘度、符合REACH标准通过ROHS 认证
「现货供应」PBT 德国巴斯夫 B6550FC 高粘度、可接触食品
「现货供应」PBT 德国巴斯夫 S4090G6 30% 玻璃纤维增强材料、耐化学、低收缩
圆高塑化有限公司,代理经销批发,一手货源,价格合理,欢迎来电洽谈!
PBT process characteristics: BEFORE PBT injection must be inthe temperature of 110 ~ 120℃ drying for about 3 hours, moldingtemperature is 250 ~ 270℃, mold temperature control in 50 ~ 75℃ isappropriate. As the material from the molten state once cooled, itwill immediately solidify and crystallize, so its cooling time isshort; If the nozzle temperature is improperly controlled (toolow), the flow passage (nozzle) is easy to cool and solidify, andthere will be nozzles blocking phenomenon. If the temperature ofthe barrel exceeds 275℃ or the molten material stays in the barrelfor more than 30 minutes, it will easily cause the material todecompose and become brittle. PBT injection need a large nozzleglue, should not use hot flow system, mold exhaust to be good,appropriate to use "high speed, medium pressure, mediumtemperature" condition molding processing, fireproof material oradd glass fiber PBT nozzle material should not be recycled, stopthe need PE or PP material timely cleaning material pipe, so as toavoid carbonization.