物性表：
| 牌号 Product Type | 测试标准 Test Standards | 单位 Units | A3K | A3K |
| 阻燃级 Flame Retardant | ||||
| 物理性能 Physical Properties | ||||
| 吸水率 Water Absorb（24h，23℃） | ISO 62 | % | 6 | 6 |
| 密度 Density | ISO 1183 | g/m3 | 1.46 | 1.47 |
| 机械性能 Mechanical Properties (23℃/50%r.h.) | ||||
| 断裂拉伸强度 Tensile Stress，at break | ISO 527 | MPa | 125 | 120 |
| 断裂伸长率 Elongation，at break | ISO 527 | % | 2 | 1 |
| 弯曲强度 Flexural Stress | IS0 178 | MPa | 175 | 170 |
| 弯曲模量 Flexural Modulus | IS0 178 | MPa | 7000 | 6800 |
| 简支梁缺口冲击强度 Charpy Notched Impact Strength | ISO 179-1eA | KJ/m2 | 7 | 5 |
| 简支梁冲击强度 Charpy Impact Strength | ISO 179-1eU | KJ/m2 | 25 | 22 |
| 洛氏硬度 Rockwell Hardness | R标尺 | 120 | 120 | |
| 热性能 Thermal Properties | ||||
| 热变形温度0.45MPa Heat Deflection Temperature 0.45MPa | ISO 75 | ℃ | 250 | 250 |
| 热变形温度1.80MPa Heat Deflection Temperature 1.80MPa | ISO 75 | ℃ | 240 | 240 |
| 阻燃性能 Fire Resistance | UL 94 | V-0 | V-0 | |
| 注塑成型温度范围 Injection Molding Temperature | ℃ | 260-285 | 260-285 | |
| 烘干温度/时间 Drying Temperature/Hour | ℃/H | 90/6-10 | 90/6-10 | |
| 其他 Others | ||||
| 表面电阻率 Surface Resistivity | IEC 93 | Ω | 1013 | 1013 |
| 介电强度 Electric Strength | IEC 1183 | KV/mm | 28 | 19 |
| 线性成型收缩率 Linear Moulding Shrinkage | ISO 2577 | % | 0.2-0.5 | 0.3-0.5 |
| 填充物 Fillers | % | GF25 | GF25 | |
