BONDERITE S-ST 6776 LO AERO PAINT STRIPPER 飞机除漆剂
产品简介
BONDERITE S-ST 6776 LO AERO （也叫TURCO6776-LO）,是一种低气味、触变脱漆剂，有效剥离耐抛光物质如环氧树脂,环氧底漆、聚氨酯和类似的催化涂料。
BONDERITE S-ST 6776 LOAERO除漆剂为车间（工厂）的安全提供了非常大的进步。它不包含二氯甲烷、氯化溶剂、酚类、铬酸盐、氨或胺。它完全符合航空/航天国家有害空气污染物排放标准。
BONDERITE S-ST 6776 LO AER可用于铝、低碳钢、铸铁和钛,在指导下使用。
BONDERITE S-ST 6776 LO AERO不建议用于高强度钢材或镁。
特点:
低气味
减少空气污染,0 lb/gal H.A.P.S.;< 2毫米汞柱V.O.C.蒸汽压
降低废物处置成本
可以很容易地处理现场
脱模使用量小于传统的二氯甲烷脱漆剂
煮沸（Pensky-Martens)没有闪点
直接使用,不需要混合或稀释
附着性能优异，可附着于垂直或顶处表面
不需要正压空气呼吸器
INTRODUCTION:
BONDERITE S-ST 6776 LO AERO (known as TURCO 6776-LO) is a lowodor, thixotropic paint remover developed for effective strippingof such resistant finishes as epoxies, epoxy primers,polyurethanes, and similar catalyzed paints.
BONDERITE S-ST 6776 LO AERO paint remover offers a significantadvance in work place safety. It does not contain methylenechloride, chlorinated solvents, phenols, chromates, ammonia oramines. It complies fully with the aircraft/aerospace NESHAP.
BONDERITE S-ST 6776 LO AERO can be used on aluminum, mild steel,cast iron, and titanium when used as directed.
BONDERITE S-ST 6776 LO AERO is not recommended for use on highstrength steel or magnesium.
FEATURES:
Low odor
Reduced air pollution, 0 lb/gal H.A.P.S.; <2 mm Hg V.O.C.Vapor Pressure
Significantly lower waste disposal costs
Can be easily treated on site (see MSDS)
Amount of stripper used less than conventional methylenechloride strippers
No flash point to boil (Pensky-Martens)
Used as received, No mixing or dilution required
Excellent cling to vertical and overhead surfaces
Positive pressure air respirators are not required
