LEIT-C Conductive Carbon Cement

Leit-C™ CCC Conductive Carbon Cement is electrically conductive,and was formulated specifically for the mounting of samples forexamination by SEM.Leit-C™CCC导电碳水泥是导电的，专门配制用于安装样品以供SEM检查。

由于其导电性，所有样品在产品干燥后即可立即插入SEM。如果它是不导电的样品，则很可能会在样品上进行某种金属化处理，例如通过溅射镀膜或如果使用FESEM，甚至可能通过镀膜。

Leit-C CCC导电胶仅包含碳，氢和氧，干燥后，使用无窗检测器，EDS也不会检测到除这三种元素以外的峰。如果整个样品架都用CCC“涂漆”，则水泥会掩盖支架，并且通常情况下，不会检测到来自支架本身的X射线，并且可能会干扰来自样品本身的X射线。
Leit-C™CCC dǎodiàn tàn shuǐní shì dǎodiàn de, zhuānmén pèizhì yòngyú ānzhu

Because of its electrical conductivity, all samples are ready forinsertion into the SEM immediately after drying of the product. Ifit is a non-conductive specimen, then there is the stronglikelihood that some kind of metallization would be preformed onthe sample, such as by sputter coating or if a FESEM isbeing used, possibly even by osmium coating.

The Leit-C CCC conductive adhesive contains only carbon, hydrogen,and oxygen, therefore after drying, there would be no peaksdetected by EDS other than the three elements, even with windowlessdetectors. If the entire specimen holder is "painted" with CCC, thecement will mask the holder and in general, one does not detectx-rays from the holder itself and would could interfere with x-raysfrom the specimen itself.