热油会因热裂解和氧化而降解。由于积碳，油降解的两种副产品是油泥和焦炭。这些产品可能会聚集在您的整个系统中，但特别是在泵密封件和内部构件、阀门等中，会导致设备问题并可能Zui终导致系统故障。在没有适当过滤的情况下持续累积污染物也可能对系统的加热表面有害，从而降低传热效率。
Hot Oils degrade by thermal cracking and oxidation. The twoby-products of oil degration is sludge and coke due to carbonbuild-up. These products can collect throughout your system, butspecifically in pump seals and internals, valves, etc. that resultin equipment problems and possibly eventual system breakdown. Thecontinuous contaminant build-up without proper filtration can alsobe detrimental to heating surfaces of your system, thereby reducingheat transfer efficiency.
The other important factor to consider is additional cost entailedfrom more rapid hot oil breakdown. This can include not onlyincreased hot oil replacement, but higher labor man-hours due toincreased maintenance and repair time and the cost of replacementparts such as seals, valves, rotors, and mag-drive canisters,thereby costs can quickly become considerable.
Filtration Benefits
Extend Service Life of the Hot Oil
Reduction of System Maintenance
Reduction of Wear and Tear on Seals
Improve Heat Transfer Efficiency
Reduces Sludge Build-Up, Thereby Improving Viscosity ofFluid
Design for Operation up to 650°F
Swing-Bolt Lid for Easy Cartridge Change-Out
Improved Flow-Rates/Throughput Due to Reduced ContaminationBuild-Up
Typical Unit Dimensions
Width: 36 inches
Diameter: 60 inches
Height: 48 inches
Available Cartridge Sizes:
100-150 Micron
75 Micron
40 Micron
30 Micron
20 Micron
15 Micron
10 Micron