6GK5416-4GS00-2AM2
 | 6GK5416-4GS00-2AM2 SCALANCE XM416-4C；受管理的 模块式 IE 交换机；16x 10/100/1000 Mbit/s RJ45；4x100/1000 Mbit/s SFP；含 4 个 组合端口；总计 16 端口 可用；可扩展至 24 个 电气或光学端口；安装：凹顶导轨/S7 型轨， PROFINET 输入输出设备； 冗余功能；办公室 特性（RSTP，VLAN，IGMP，..)； C型插头在供货范围内； 第 3 层设备带 Key-Plug 可用 . |
概述
Introduction
SINAMICS G120C compact converters
Line-side components
DC link components
Load-side power components
Supplementary system components
Spare parts
The SINAMICS G120C frequency converter offers the SafeTorque Off (STO) function as a standard feature.
The Safety Integrated function is completely integrated into thedrive system. It can be activated via fail-safe digital inputs onthe converter or via PROFINET or PROFIBUS with PROFIsafe.
The Safety Integrated function is implemented electronically andtherefore offers short response times in comparison to solutionswith externally implemented monitoring functions.
功能
Function
Control
Encoder required
License required
STO
No
No
F-DI
PROFIsafe
- Energy-efficient SINAMICS drives save energy in an intelligentway
Exploit energy-saving potential and optimize energy consumption:You can - with intelligent SINAMICS drives. Depending on theapplication in question, energy consumption can be controlled bymotor speed adjustment to suit the individual process and achievethe greatest possible energy savings. The energy consumption ofdrives for turbo machines can be cut by as much as 60 %.Regenerative feedback is also an option for many applications. Ourportfolio of frequency converters is the most comprehensive andstandardized range on the market and the first choice for anyoneseeking an energy-efficient drive – at low-voltage ormedium-voltage level.
- Energy-efficient drives with intelligent functions
Depending on the application and load profile, the intelligentenergy-saving functions of SINAMICS drives can cut energyconsumption.
PROFIenergy
Provides energy-related status data for the system components tocreate transparency for the energy management; energy savings byselective shutdown of plants or plant sections.
ECO mode
In ECO mode, the operating point of the motor in thepartial-load range is automatically adjusted and optimized. Thisreduces motor losses, for example, in machines that do not need ahigh torque over the entire operating range.
Hibernation mode
Variable-speed drives that are not required to operatecontinuously are switched to standby or "Hibernation mode". Thedrive is restarted again as soon as it is needed.
Bypass mode
In bypass mode it is possible to "bypass" the converterelectrically as soon as the motor is frequently operating close toits rated speed. This solution helps reduce converter losses and soincrease overall efficiency.
Cascading
In pump, fan and compressor applications involving high outputs,the entire power demand is distributed among several motors. Phasedconnection and disconnection by means of partially or fullycontrolled cascades in combination with converters make a drivesystem more energy-efficient.
Energy balancing
Through the use of inverters with coupled drives, energy isexchanged through the common DC link. Through the direct energyexchange from one inverter to the next, it is possible to minimizepower losses in the system.
Reactive power compensation
The use of SINAMICS converters with Active Line Modules reducesthe capacitive and/or inductive reactive power in the machine. Itis then possible to dispense with costly reactive powercompensation systems.
Kinetic energy buffering
With dynamic reversing operations in single-axis and multi-axissystems, the kinetic energy available in the system is reused. Amotor connected to the common DC link is used to buffer kineticenergy.
Electrical energy buffering
With dynamic reversing operations in single-axis and multi-axissystems, the kinetic energy available in the system is reused. Acapacitor module connected to the common DC link is used to bufferelectrical energy.
Optimized pulse patterns
Thanks to optimized clock frequency and pulse pattern,SINAMICS G and SINAMICS S are perfectly suited toSIMOTICS motors and SIMOGEAR geared motors. The benefits:Optimization of performance and system efficiency, reduced systemlosses as well as lower temperature and noise levels.
Energy usage counter/Energy saving counter
Actual energy usage can be displayed during operation.Furthermore, an energy saving counter can be installed to indicatethe cumulative energy savings during machine operation as comparedto a fixed-speed application.
Regenerative feedback
In conventional drive systems, the energy produced duringbraking is converted to heat using braking resistors.SINAMICS G and SINAMICS S converters with regenerativefeedback capability need no braking resistor, and supply theresulting braking energy back into the line.
DC link coupling with SINAMICS V20
Applications with two SINAMICS V20 converters with the samepower rating can share a common DC link in order to reuseregenerated energy.
集成
- Overview of the energy-saving functions for SINAMICS drivesincluding SIMATIC ET 200pro FC-2 frequencyconverters
Energy-saving function
Low voltage
Standard Performance frequency converters
Distributed frequency converters
SINAMICS
SINAMICS
SIMATIC
V20
G120C
G120
G130
G150G115D wall and motor-mounted
G120D
ET 200pro FC-2 1)
CU230P‑2
CU240E‑2
CU250S‑2
CU320-2
CU240D-2
CU250D-2
Functions
ECO mode
✓
–
Hibernation mode
Bypass mode
Cascading
Energy balancing
Reactive power compensation
Kinetic energy buffering
Electrical energy buffering
Optimized pulse patterns
Energy usage counter/Energy saving counter
Energy recovery
✓ with PM250 Power Module
Communication protocol and profile
PROFINET
–
Ready for SIMATIC Energy Suite
Integrated energy management
PROFIenergy
6GK5416-4GS00-2AM2
Energy-saving function
Low voltage
Industry-specific frequency converters
Servo converters
High performance frequency converters
SINAMICS
G120P
G120X
G180
V90
S110
S210
S120
S120MS150
CU305
CU310-2
Functions
✓ for multi-axis drives only
✓ with Active Line Module
✓ with Smart Line Module or Active Line Module
Communication protocol and profile
✓
Ready for SIMATIC Energy Suite