1、铣床欧盟CE认证指令
MD机械指令:2006/42/EC
2、铣床欧盟CE认证标准:
EN ISO 12100:2010 机械安全 - 用于设计的一般准则-风险评估及风险降低
EN 60204-1:2018 机械安全.机械电气设备.第1部分:一般要求
EN 13128:2001+A2:2009 Safety of machine tools - Milling machines(including boring machines) 机床的安全.铣床(包括镗床)
3、EN13128:2001+A2:2009适用范围:
1.1 This standard specifies the technical safety requirements andmeasures to be adopted by persons undertaking the design,construction and supply (including installation and dismantling,with arrangements for transport and maintenance) of millingmachines (see 3.1) including machines capable of performing boringoperations (see 3.5).
Machines covered by this standard include but are not limitedto:
knee and column type milling machines ;
bed–type milling machines ;
multi–spindle milling machines ;
plano–milling machines ;
profile and contouring milling machines ,
milling and boring machines .
1.2 This standard takes account of intended use includingreasonably foreseeable misuse, maintenance, cleaning, and settingoperations. It presumes access to the machine from all directions.It describes means to reduce risks to operators and other exposedpersons.
1.3 This standard also applies to workpiece transfer devices whenthey form an integral part of the machine.
1.4 These standard deals with significant hazards relevant tomilling machines when they are used as intended and under theconditions foreseen by the manufacturer (see clause 4).
1.5 Hazards arising from other metal working processes (e.g.,grinding, turning, forming, EDM, laser processing) are covered byother standards (see Bibliography).
1.6 Milling machines with automatic tool changing capabilities arenot covered by this standard (see prEN 12417:1996).
1.7 This standard is not applicable to milling machines which weremanufactured before the date of publication by CEN of thisstandard.
1.1本标准规定了铣床(见3.1)(包括能够进行钻孔操作的机器(见3.5))的设计、施工和供应(包括安装和拆卸,以及运输和维护安排)人员应采取的技术安全要求和措施。
本标准涵盖的机器包括但不限于:
膝柱式铣床);
台式铣床;
多轴铣床);
plano–铣床;
仿形和仿形铣床,
铣床和镗床。
1.2本标准考虑了预期用途,包括可合理预见的误用、维护、清洁和设置操作。它假定可以从各个方向进入机器。它描述了降低操作员和其他暴露人员风险的方法。
1.3当工件转移装置构成机器的一个组成部分时,本标准也适用于这些装置。
1.4本标准涉及在制造商预见的条件下按预期使用铣床时与铣床相关的重大危险(见第4条)。
1.5其他标准涵盖了其他金属加工过程(如磨削、车削、成型、电火花加工、激光加工)产生的危险(见参考文献)。
1.6本标准不包括具有自动换刀功能的铣床(见prEN 12417:1996)。
1.7本标准不适用于CEN发布日期之前制造的铣床。
上海迈希泽,专业CE认证技术服务公司,致力于中国制造全球化服务!提供quanweiCE认证机构-欧盟公告号机构机械设备CE认证服务,高效可靠!