西门子1FL2102-4AG01-1MC0 S200 200V低惯量型电机

概述

Industrial Edge app LiveTwin enables users of Siemens IndustrialEdge to easily and directly run 1D simulation models.
LiveTwin Edge app can run a wide variety of 1D simulation models,such as simulations of mechatronic systems.

The following scenarios are possible:

• Export simulation models directly from MATLAB® Simulink®,Amesim, Open Modelica, and more than 100 other simulation tools andsimply play them in the Siemens Edge devices.
  No additional engineering work is required.

• Execute simulations that were created in differentdomain-specific tools and wire all parts to each other.

• Use the natively supported interfaces of Siemens Industrial Edgeto connect the simulation to the automation and furthersystems.

This application can be purchased via the Edge Marketplaceunder this link.

If you have any questions, please get in touch with your contactperson in the region or contact us via email

优势

Due to the proximity of Industrial Edge to the process, ahigh-cycle (10 ms) data connection with the PLC is possible.
LiveTwin support the calculation of virtual sensors, "ModelPredictive Control", status monitoring and many othersimulations.

应用

For new and existing systems for:

• Process optimization

• Savings in hardware costs

• Predictive maintenance

• Reduction in downtimes

功能

Industrial Edge app LiveTwin is compatible with the FMIstandard 1) andtherefore compatible with the most important 1D simulation tools onthe market, including Simcenter Amesim (for multi-physics models),MATLAB® Simulink®, Ansys and many others.

Industrial Edge app LiveTwin is software that is independent of thesimulation tool. It is fully integrated in MATLAB® Simulink® andcan run models that were exported to a destination with SimulinkCoder as code in C++.

Industrial Edge app LiveTwin is integrated in the SiemensIndustrial Edge ecosystem with the Industrial Edge app FlowCreator.
This integration enables the user to pre-process and collect data,among other things, with the wireframe of the Flow app and theportability of LiveTwin simulation models.

Users can import various models of different simulation toolsdirectly into LiveTwin and create model instances, connect themodels with Flow Creator, and run the various models togetherwithout additional runtime for each individual simulation softwarethat was used originally to create the models. This shows theportability, compatibility and independence of the simulationsoftware used.

1) Functional Mockup Interface, see at thislink.