M602D01美国PCB原装进口
Platinum Stock Products; Low profile, industrial, ceramicshear ICP® accel., 100 mV/g, 0.5 to 8000 Hz, side exit, 2-pinconnector, single point ISO 17025 accredited calibration
052AE010BZ052 cable, 10-ft,environmentally sealed MIL-type, 2-socket conn. to blunt cuttermination
Two-conductor shielded twistedpair cable with polyurethane jacket, 10 ft., push-on 2-socket MILwith environmental boot to blunt cut
Number of Conductors: 2
Cable Style: Multi Conductor - Shielded
Connector Style: MIL-C-5015
Connector Style: Blunt Cut
Cable Jacket Diameter: 0.25 in (6.35 mm)
English:SI:PERFORMANCENumber of Conductors22
Cable StyleMulti Conductor - ShieldedMulti Conductor - Shielded
Connector Model (sensor side)En√ironmental BootEn√ironmentalBoot
Connector Style (sensor side)MIL-C-5015MIL-C-5015
Connection Type (sensor side)2-pin2-pin
Coupling Method (sensor side)Push-onPush-on
Connector Style (termination)Blunt CutBlunt Cut
ENVIRONMENTALTemperature Range-58 to 250 °F-50 to 121 °C
ELECTRICALCapacitance36 pF/ft118 pF/m
PHYSICALCable Jacket Diameter0.25 in6.35 mm
Cable Jacket MaterialPolyurethanePolyurethane
Cable Jacket ColorBlackBlack
Conductor StyleStranded - 19 strands 32 AWGStranded - 19 strands 32AWG
Conductor MaterialTin Plated CopperTin Plated Copper
Conductor Diameter (20 AWG)0.04 in1.02 mm
Shield Type Over BundleBraid: 90% Minimum CoverageBraid: 90%Minimum Coverage
Shield Material Over BundleTin Plated CopperTin Plated Copper
Bend Radius (minimum)2.5 in63.5 mm
Weight0.67 oz/ft61.85 gm/m
Size - Length10 ft3.048 m
All specifications are at room temperature unless otherwisespecified.
English:SI:PERFORMANCESensitivity (±10 %)100 mV/g10.2mV/(m/s²)[1] Measurement Range±50 g±490 m/s²
Frequency Range (±3 dB)30 to 480000 cpm0.5 to 8000Hz[3] Resonant Fre kcpm25 kHz[4] BroadbandResolution350 µg3434 µm/sec2[4] Non-Linearity±1%±1 %[2] Transverse Sensitivity≤7 %≤7 %
ENVIRONMENTALOverload Limit (Shock)5000 g pk49050 m/s² pk
Temperature Range-65 to +250 °F-54 to +121 °C
Temperature ResponseSee Graph %/°FSee Graph %/°F[4] EnclosureRatingIP68IP68
ELECTRICALSettling Time (within 1% of bias)≤2.0 sec≤2.0 sec
Discharge Time Constant≥0.3 sec≥0.3 sec
Excitation Voltage18 to 28 VDC18 to 28 VDC
Constant Current Excitation2 to 20 mA2 to 20 mA
Output Impedance<150 Ohm<150 Ohm
Output Bias Voltage8 to 12 VDC8 to 12 VDC
Spectral Noise (10 Hz)8.0 µg/√Hz78.5(µm/sec2)/√Hz[4] Spectral Noise (100 Hz)5µg/√Hz49.1 (µm/sec2)/√Hz[4] Spectral Noise (1kHz)4 µg/√Hz39.2 (µm/sec2)/√Hz[4] ElectricalIsolation (Case)>100000000 Ohm>100000000 Ohm
PHYSICALSize - Length1.65 in41.9 mm
Size - Width0.74 in18.8 mm
Size - Height0.845 in21.5 mm
Weight2.61 oz74.0 gm
Mounting Thread1/4-28 MaleNo Metric E[5] MountingTorque2 to 5 ft-lb2.7 to 6.8 Nm
Sensing ElementCeramicCeramic
Sensing GeometryShearShear
Housing MaterialStainless SteelStainless Steel
SealingWelded HermeticWelded Hermetic
Electrical Connector2-Pin MIL-C-50152-Pin MIL-C-5015
Electrical Connection PositionSideSide
All specifications are at room temperature unless otherwisespecified.
Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of thespecified fre
[4] Typical.
[5] 1/4-28 has no e in S.I. units.
[6] See PCB Declaration of Conformance PS023 or PS060 fordetails.
Accessories:
Supplied081A97Thru bolt 1/4-28(1)Optional Versions:
(EX) Hazardous Area Approval- contact factory for specificapprovals
ENGLISHSI Hazardous Area ApprovalEEx nL IICT4, -40°C<=Ta<=121°C, II 3 G HazardousArea ApprovalEEx nL IIC T4, -40°C<=Ta<=121°C, II 1G Hazardous Area ApprovalCl I, Div I, GroupsA, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, DivI Hazardous Area ApprovalEx ia IIC T4, AExiaIIC, T4 Hazardous Area ApprovalCl I, Div 2,Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
(M) Metric Mount
ENGLISHSI
Accessories:
M081A97Captive Mounting Bolt(1)
(TO) Temperature Output
ENGLISHSI Temperature Output Range+36 to+250 °F+2 to +121 °C Temperature ScaleFactor5.56 mV/°F + 32+10 mV/°C ElectricalConnector3-Pin Electrical Connections (PinA)Acceleration Output Electrical Connections(Pin C)Temperature Output ElectricalConnections (Pin B)Ground
