Rotary Torque Angle Transducer, w/Auto-ID, 50 lbf-ft (68 Nm),3/8-inch Square Drive, 10-pin PT Receptacle
Measurement Range: (Full Scale Capacity) 50 lbf-ft(68 Nm)
Sensitivity: (output at rated capacity) 2.0 mV/V(2.0 mV/V)
Non-Linearity: <=0.25 % FS
Maximum Speed: 2500 RPM
PERFORMANCEMeasurement Range (Full Scale Capacity)50 lbf-ft68NmSensitivity (output at rated capacity)2.0 mV/V2.0mV/V[3] Non-Linearity≤0.25 % FS≤0.25 %FS[1] Hysteresis≤0.25 % FS≤0.25 %FS[1] Non-Repeatability≤0.05 % FS≤0.05 %FS[1] Interchangeabilty≤0.30 % FS≤0.30 %FS[1][2] ENVIRONMENTALOverload Limit75 lbf-ft101 Nm
Temperature Range (Operating)0 to +200 °F-18 to +93 °C
Temperature Range (Compensated)+70 to +150 °F+21 to +66 °C
Temperature Effect on Output (Maximum)±0.002 %Reading/°F±0.0018%Reading/°C[4] Temperature Effect on Zero Balance(Maximum)±0.002 %FS/°F±0.0018 %FS/°C[4] ELECTRICALBridgeResistance350 Ohm350 Ohm
Excitation Voltage10 VDC10 VDC[5] Insulation Resistance≥5GOhm≥5 GOhm
Zero Balance≤2 % FS≤2 % FS[1] Counts PerRevolution14721472[7] Resolution w/ /4 °1/4°[7] Output VoltageHigh 5V to Low 0.5VHigh 5V to Low0.5V[7] Power Required (maximum)5 VDC @ 120mA5 VDC @120mA[7] Magnetic Encoder (Poles)360360[7] MagneticEncoder (Ouput)See NoteSee Note[6][7] Shunt Calibration≤0.25 %FS≤0.25 % FS[1][8] Auto IDTTL ProprietaryTTL Proprietary
PHYSICALSize - Shaft Length3.23 in82.0 mm[10] Size - HousingLength2.30 in58.4 mm[10] Size - Housing Height2.00 in50.8mm[10] Weight.85 lb386 gm
Mounting3/8 inch S mm Sq Drive[9] SensingElementStrain GageStrain Gage
Housing MaterialAluminumAluminum
Shaft MaterialSteelSteel
Electrical ConnectorPT02H-12-10PPT02H-12-10P
Maximum Speed2500 RPM2500 RPM
All specifications are at room temperature unless otherwisespecified.
Product Notes
[1] FS - Full Scale.
[2] Matched for mV/V and shunt calibration.
[3] Matched to ±0.25% F.S.
[4] Over compensated temperature range.
[5] Calibrated at 10 VDC, usable 5 to 20 VDC or VAC RMS.
[6] A-B Track 90° Phase Difference, Flat Over Operating Speed
[7] Magnetic Encoder Specifications.
[8] Matched with 43.575 kOhm Precision Resistor.
[9] Per ANSI B107.4 Specifications
[10] See Outline Drawing LT38037 for Complete Dimensions
[11] See PCB Declaration of Conformance PS119 for details.
Accessories:
Optional080920-01000(1)
080962-01000MODEL 962 DATA RECORDER(1)
097000-34445INTERCONNECT CABLE(1)
4242R-000630MATING CONNECTOR PT06A-12-10S(SR)(1)
Supplied7122R-04352APRECISION CAL RESISTOR 43.575 kOhm(1)
Model: M039237-50051
Rotary Torque Angle Transducer, w/Auto-ID, 68 Nm, 3/8-inchSquare Drive, 10-pin PT Receptacle, calibrated in Nm.
PERFORMANCEMeasurement Range (Full Scale Capacity)50 lbf-ft68Nm
Sensitivity (output at rated capacity)2.0 mV/V2.0mV/V[3] Non-Linearity≤0.25 % FS≤0.25 %FS[1] Hysteresis≤0.25 % FS≤0.25 %FS[1] Non-Repeatability≤0.05 % FS≤0.05 %FS[1] Interchangeabilty≤0.30 % FS≤0.30 %FS[1][2] ENVIRONMENTALOverload Limit75 lbf-ft101 Nm
Temperature Range (Operating)0 to +200 °F-18 to +93 °C
Temperature Range (Compensated)+70 to +150 °F+21 to +66 °C
Temperature Effect on Output (Maximum)±0.002 %Reading/°F±0.0018%Reading/°C[4] Temperature Effect on Zero Balance(Maximum)±0.002 %FS/°F±0.0018 %FS/°C[4] ELECTRICALBridgeResistance350 Ohm350 Ohm
Excitation Voltage10 VDC10 VDC[5] Insulation Resistance≥5GOhm≥5 GOhm
Zero Balance≤2 % FS≤2 % FS[1] Counts PerRevolution14401440[7] Resolution w/ /4 °1/4°[7] Output VoltageHigh 5V to Low 0.5VHigh 5V to Low0.5V[7] Power Required (maximum)5 VDC @ 120mA5 VDC @120mA[7] Magnetic Encoder (Poles)360360[7] MagneticEncoder (Ouput)See NoteSee Note[6][7] Shunt Calibration≤0.25 %FS≤0.25 % FS[1][8] Auto IDTTL ProprietaryTTL Proprietary
PHYSICALSize - Shaft Length3.23 in82.0 mm[10] Size - HousingLength2.30 in58.4 mm[10] Size - Housing Height2.00 in50.8mm[10] Weight.85 lb386 gm
Mounting3/8 inch S mm Sq Drive[9] SensingElementStrain GageStrain Gage
Housing MaterialAluminumAluminum
Shaft MaterialSteelSteel
Electrical ConnectorPT02H-12-10PPT02H-12-10P
Maximum Speed2500 RPM2500 RPM