086D02力锤传感器优惠接触
Short-sledge Impulse Hammerw/force sensor & tips, 0 to 5k lbf, 1 mV/lbf (0.23 mV/N), 2.4-lbhead
Sensitivity: (±15%) 1 mV/lbf (0.23 mV/N)
Measurement Range: ±5000 lbf pk (±22240 N pk)
Hammer Mass: 2.4 lb (1.1 kg)
All specifications are at room temperature unless otherwisespecified.
ProductNotes
[1] Typical.
[2] See PCB Declaration of Conformance PS136 for details.
Accessories:
| Supplied | |||
| 084A60 | Tip - super soft plastic, gray | (1) | |
| 084A61 | Tip - soft plastic, brown | (1) | |
| 084A62 | Tip - medium plastic, red | (1) | |
| 084A63 | Tip - hard plastic, black | (1) | |
| HCS-2 | Calibration of Series 086instrumented impact hammers | (1) | |
OptionalVersions:
(T) TEDS Capable of Digital Memory and Communication Compliantwith IEEE P1451.4
| ENGLISH | SI | |
| Output Bias Voltage | 8.5 to 15 VDC | |
(TLD) TEDS Capable of Digital Memory and Communication Compliantwith IEEE 1451.4
| ENGLISH | SI | |
| Output Bias Voltage | 8.5 to 15 VDC | |
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Sensitivity (±15 %) | 1 mV/lbf | 0.23 mV/N | |
| Measurement Range | ±5000 lbf pk | ±22240 N pk | |
| Resonant Frequency | ≥12 kHz | ≥12 kHz | |
| Non-Linearity | ≤1 % | ≤1 % | |
| Electrical | |||
| Excitation Voltage | 20 to 30 VDC | 20 to 30 VDC | |
| Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
| Output Impedance | <100 Ohm | <100 Ohm | [1] |
| Output Bias Voltage | 8 to 14 VDC | 8 to 14 VDC | |
| Discharge Time Constant | ≥1400 sec | ≥1400 sec | [1] |
| Physical | |||
| Sensing Element | Quartz | Quartz | |
| Sealing | Hermetic | Hermetic | |
| Hammer Mass | 2.4 lb | 1.1 kg | |
| Head Diameter | 2.0 in | 5.1 cm | |
| Tip Diameter | 2.0 in | 5.1 cm | |
| Hammer Length | 14.5 in | 37 cm | |
| Electrical Connection Position | Bottom of Handle | Bottom of Handle | |
| Electrical Connector | BNC Jack | BNC Jack | |
