086E80力锤传感器共创美好
Miniature Instrumented ImpulseHammer, 0 to 50 lbf
Sensitivity: (±20%) 100 mV/lbf (22.5 mV/N)
Measurement Range: 50 lbf pk (222 N pk)
Hammer Mass: 0.17 oz (4.8 gm)
All specifications are at room temperature unless otherwisespecified.
ProductNotes
[1] Typical.
[2] Steel tip with no extender mass.
[3] With plastic handle attached.
[4] With aluminum handle attached.
[5] See PCB Declaration of Conformance PS136 for details.
Accessories:
| Supplied | |||
| 001A20 | Case | (1) | |
| 018G10 | Miniature coaxial cable, vinylinsulation jacket, 10-ft, 5-44 to 10-32 coaxial plug | (1) | |
| 080A109 | Petro Wax | (1) | |
| 084A13 | Extender mass | (1) | |
| 084A17 | Aluminum handle with 5-44connector | (1) | |
| HCS-2 | Calibration of Series 086instrumented impact hammers | (1) | |
| 084A14 | Plastic handle assembly | (2) | |
| 084A28 | Vinyl impact cap, red | (3) | |
OptionalVersions:
No optional versions
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Sensitivity (±20 %) | 100 mV/lbf | 22.5 mV/N | [2] |
| Measurement Range | 50 lbf pk | 222 N pk | |
| Resonant Frequency | ≥100 kHz | ≥100 kHz | |
| Non-Linearity | ≤1 % | ≤1 % | [1] |
| Electrical | |||
| Excitation Voltage | 20 to 30 VDC | 20 to 30 VDC | |
| Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
| Output Impedance | <100 Ohm | <100 Ohm | |
| Output Bias Voltage | 8 to 14 VDC | 8 to 14 VDC | |
| Discharge Time Constant | ≥100 sec | ≥100 sec | [1] |
| Physical | |||
| Sensing Element | Quartz | Quartz | |
| Sealing | Epoxy | Epoxy | |
| Hammer Mass | 0.17 oz | 4.8 gm | [3] |
| Head Diameter | 0.25 in | 6.3 mm | |
| Tip Diameter | 0.10 in | 2.5 mm | |
| Hammer Length | 4.2 in | 107 mm | [3] |
| Electrical Connection Position | Side | Side | |
| Extender Mass Weight | 0.044 oz | 1.25 gm | |
| Electrical Connector | 5-44 Coaxial | 5-44 Coaxial | [4] |
