2508-04A（2301-01A）美国PCB力矩传感器稳健发展
Model: 2508-04A：
PCB L&T Reaction Torque Transducer, 500 in-lb/41.7 ft-lb (56.6N-m) rated capacity, 50% static overload protection, 2-in (50.8 mm)Steel Flange
Measurement Range: 500 lbf-in (56.5 Nm)
Sensitivity: 2 mV/V (2 mV/V)
Mounting: Flange (#10-24 Bolts) (Flange (NoMetric E))
Size - Diameter: 2.00 in (50.8 mm)
Size - Length: 3.00 in (76.2 mm)
Torsional Stiffness: 73 klbf-in/radian (8248N-m/radian)
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Measurement Range (Full ScaleCapacity) | 500 lbf-in | 56.5 Nm | |
| Sensitivity (output at rated capacity) | 2 mV/V | 2 mV/V | [1][2] |
| Non-Linearity | ≤0.10 % FS | ≤0.10 % FS | [2] |
| Hysteresis | ≤0.10 % FS | ≤0.10 % FS | [2] |
| Non-Repeatability | ≤0.02 % FS | ≤0.02 % FS | [2] |
| Resonant Frequency | 2050 Hz | 2050 Hz | |
| Maximum Torque | 750 lbf-in | 84.7 Nm | |
| Environmental | |||
| Overload Limit (Axial Thrust) | 500 lbf | 2224 N | [3] |
| Overload Limit (Overhung Moment) | 250 lbf-in | 28.2 Nm | [3] |
| Overload Limit (Shear) | 500 lbf | 2224 N | [3] |
| Temperature Range (Operating) | -65 to +170 °F | -54 to 77 °C | |
| Temperature Range (Compensated) | +70 to +170 °F | +21 to +77 °C | |
| Temperature Effect on Output (Maximum) | ±0.002 %Reading/°F | ±0.0036 %Reading/°C | [4] |
| Temperature Effect on Zero Balance(Maximum) | ±0.002 %FS/°F | ±0.0036 %FS/°C | [2][4] |
| Electrical | |||
| Bridge Resistance | 350 Ohm | 350 Ohm | |
| Excitation Voltage (Recommended) | 10 VDC | 10 VDC | [5] |
| Insulation Resistance | 5 GOhm | 5 GOhm | |
| Zero Balance | ≤1 %RO | ≤1 %RO | |
| Output Polarity | cw+ | cw+ | |
| Physical | |||
| Size - Diameter | 2.00 in | 50.8 mm | [6] |
| Size - Length | 3.00 in | 76.2 mm | [6] |
| Weight | 2 lb | 908 g | |
| Mounting | Flange (#10-24 Bolts) | Flange (No Metric E) | |
| Torsional Stiffness | 73 klbf-in/radian | 8248 N-m/radian | |
| Sensing Element | Strain Gage | Strain Gage | |
| Housing Material (Sensor) | Anodized Aluminum | Anodized Aluminum | |
| Electrical Connector | PT02E-10-6P | PT02E-10-6P | |
Model: 2301-01A
PCB L&T Reaction Torque Transducer, 2,000 in-lb/167 ft-lb (226N-m) rated capacity, 50% static overload protection, 4-in (101.6mm) Steel Flange
Measurement Range: 2000 lbf-in (226 Nm)
Sensitivity: (±15%) 2 mV/V (2 mV/V)
Mounting: Flange (5/16in Bolts) (Flange (M8Bolts))
Size - Diameter: 4.00 in (101.6 mm)
Size - Length: 3.00 in (76.2 mm)
Torsional Stiffness: 370 klbf-in/radian (41.8kN-m/radian)
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Measurement Range (Full ScaleCapacity) | 2000 lbf-in | 226 Nm | [1] |
| Sensitivity (±15 %) (output at ratedcapacity) | 2 mV/V | 2 mV/V | [1] |
| Non-Linearity | 0.1 % FS | 0.1 % FS | [2] |
| Hysteresis | 0.1 % FS | 0.1 % FS | [2] |
| Non-Repeatability | 0.02 % FS | 0.02 % FS | [2] |
| Resonant Frequency | 1000 Hz | 1000 Hz | |
| Maximum Torque | 3000 lbf-in | 339 Nm | |
| Environmental | |||
| Overload Limit (Axial Thrust) | 2000 lbf | 8900 N | [3] |
| Overload Limit (Overhung Moment) | 1000 lbf-in | 113 Nm | [3] |
| Overload Limit (Shear) | 1000 lbf | 4448 N | [3] |
| Temperature Range (Operating) | -65 to +200 °F | -54 to +93 °C | |
| Temperature Range (Compensated) | +70 to +170 °F | +21 to +77 °C | |
| Temperature Effect on Output (Maximum) | ±0.002 %Reading/°F | ±0.0036 %Reading/°C | [4] |
| Temperature Effect on Zero Balance(Maximum) | ±0.002 %FS/°F | ±0.0036 %FS/°C | [2] |
| Electrical | |||
| Bridge Resistance | 350 Ohm | 350 Ohm | |
| Excitation Voltage (Recommended) | 10 VDC | 10 VDC | [5] |
| Insulation Resistance | 5 GOhm | 5 GOhm | |
| Zero Balance | ≤1 %RO | ≤1 %RO | |
| Output Polarity | cw+ | cw+ | |
| Physical | |||
| Size - Diameter | 4.00 in | 101.6 mm | [6] |
| Size - Length | 3.00 in | 76.2 mm | [6] |
| Weight | 5.00 lb | 2268 g | |
| Mounting | Flange (5/16in Bolts) | Flange (M8 Bolts) | |
| Torsional Stiffness | 370 klbf-in/radian | 41.8 kN-m/radian | |
| Sensing Element | Strain Gage | Strain Gage | |
| Housing Material | Anodized Aluminum | Anodized Aluminum | |
| Sensor Material | plated steel | plated steel | |
| Electrical Connector | PT02E-10-6P | PT02E-10-6P | |
我们的地址：上海市金山区吕巷镇干巷荣昌路318号3幢1018室
电话：021-59112701
联系手机： 期待您的咨询
通用型静态应变力传感器（载荷传感器） | |||||||
型号 | 量程范围 | 灵敏度 | 频率响应 | 过载能力 | 温度范围 | 接头形式 | 重量 |
1102系列 （直径×高度=φ69.9×38.1mm）（内孔螺纹规格：1/4-28） | |||||||
1102-05A | 110 N | 2 mV/N | 2100 Hz | 165 N | -54— +93℃ | 6针 | 304 gm |
1102-01A | 225 N | 2800 Hz | 330 N | ||||
1102-02A | 445 N | 3800 Hz | 675 N | ||||
1102-03A | 900 N | 5400 Hz | 1350 N | ||||
1102-04A | 7000 Hz | 2000 N | |||||
1204系列 （直径×高度=φ153.9×44.5 mm）（内孔螺纹规格：11/14-12） （平面有通孔φ10.4×12 EQS）注：平面通孔可选择成螺纹孔3/8-24 | |||||||
1204-01A | 44.5 k N | 3 mV/N | 5500 Hz | 66.7 k N | 4.06 kg | ||
1204-02A | 89 k N | 8000 Hz | 130 k N | ||||
1204-03A | 220 k N | 12 k Hz | 335 k N | ||||
1208系列 （直径×高度=φ203.2×63.5 mm）（内孔螺纹规格：13/4-12） （平面有通孔φ13.5×16 EQS）注：平面通孔可选择成螺纹孔1/2-20 | |||||||
1208-01A | 6750 Hz | 11.57 kg | |||||
1208-02A | 450 k N | 9550 Hz | 665 k N | ||||
1233系列 （直径×高度=φ104.6×34.8 mm）（内孔螺纹规格：11/4-12） | |||||||
1233-01B | 2225 N | 5000 Hz | 3300 N | 0.48 kg | |||
1233-02B | 4450 N | 6675 N | |||||
1233-03B | 8900 N | 10 k Hz | 13.3 k N | ||||
注： | |||||||
1. 非线性度:≤0.05%FS，1208系列为0.1%FS 2. 滞后性:≤0.05%FS，1208系列为0.1%FS 3. 非重复性;≤0.02%FS，1208系列为0.05%FS | |||||||