039030-50021/039025-50051旋转扭矩传感器美国PCB进口
039030-50021
PCB L&T Rotary Torque Only Transducer, w/Auto-ID, 20 lbf-in(2.3 Nm), 1/4-inch Hex Drive, 10-pin PT Receptacle
Measurement Range: 20 lbf-in (2.3 Nm)
Sensitivity: 2.0 mV/V (2.0 mV/V)
Non-Linearity: <=0.25 % FS
Maximum Speed: 5000 RPM
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Measurement Range (Full ScaleCapacity) | 20 lbf-in | 2.3 Nm | |
| Sensitivity (output at rated capacity) | 2.0 mV/V | 2.0 mV/V | [3] |
| Non-Linearity | ≤0.25 % FS | ≤0.25 % FS | [1] |
| Hysteresis | ≤0.25 % FS | ≤0.25 % FS | [1] |
| Non-Repeatability | ≤0.05 % FS | ≤0.05 % FS | [1] |
| Interchangeabilty | ≤0.30 % FS | ≤0.30 % FS | [1][2] |
| Environmental | |||
| Overload Limit | 30 lbf-in | 3.4 Nm | |
| Temperature Range (Operating) | 0 to +200 °F | -18 to +93 °C | |
| Temperature Range (Compensated) | +70 to +150 °F | +21 to +66 °C | |
| Temperature Effect on Output (Maximum) | ±0.002 %Reading/°F | ±0.0018 %Reading/°C | [4] |
| Temperature Effect on Zero Balance(Maximum) | ±0.002 %FS/°F | ±0.0018 %FS/°C | [4] |
| Electrical | |||
| Bridge Resistance | 350 Ohm | 350 Ohm | |
| Excitation Voltage | 10 VDC | 10 VDC | [5] |
| Insulation Resistance | ≥5 GOhm | ≥5 GOhm | |
| Zero Balance | ≤2 % FS | ≤2 % FS | [1] |
| Shunt Calibration | ≤0.25 % FS | ≤0.25 % FS | [1][6] |
| Auto ID | TTL Proprietary | TTL Proprietary | |
| Physical | |||
| Size - Shaft Length | 4.25 in | 108.0 mm | [7] |
| Size - Housing Length | 2.30 in | 58.4 mm | [7] |
| Size - Housing Height | 2.00 in | 50.8 mm | |
| Weight | .75 lb | 340 gm | |
| Mounting | 1/4 inch Hex Drive | 6.35 mm Hex Drive | [8] |
| Sensing Element | Strain Gage | Strain Gage | |
| Housing Material | Aluminum | Aluminum | |
| Shaft Material | Steel | Steel | |
| Electrical Connector | PT02H-12-10P | PT02H-12-10P | |
| Maximum Speed | 5000 RPM | 5000 RPM | |
039025-50051
PCB L&T Rotary Torque Only Transducer, w/Auto-ID, 50 lbf-in(5.7 Nm), 1/4-inch Square Drive, 10-pin PT Receptacle
Measurement Range: 50 lbf-in (5.7 Nm)
Sensitivity: 2.0 mV/V (2.0 mV/V)
Non-Linearity: <=0.25 % FS
Maximum Speed: 5000 RPM
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Measurement Range (Full ScaleCapacity) | 50 lbf-in | 5.7 Nm | |
| Sensitivity (output at rated capacity) | 2.0 mV/V | 2.0 mV/V | [3] |
| Non-Linearity | ≤0.25 % FS | ≤0.25 % FS | [1] |
| Hysteresis | ≤0.25 % FS | ≤0.25 % FS | [1] |
| Non-Repeatability | ≤0.05 % FS | ≤0.05 % FS | [1] |
| Interchangeabilty | ≤0.30 % FS | ≤0.30 % FS | [1][2] |
| Environmental | |||
| Overload Limit | 75 lbf-in | 8.5 Nm | |
| Temperature Range (Operating) | 0 to +200 °F | -18 to +93 °C | |
| Temperature Range (Compensated) | +70 to +150 °F | +21 to +66 °C | |
| Temperature Effect on Output (Maximum) | ±0.002 %Reading/°F | ±0.0018 %Reading/°C | [4] |
| Temperature Effect on Zero Balance(Maximum) | ±0.002 %FS/°F | ±0.0018 %FS/°C | [4] |
| Electrical | |||
| Bridge Resistance | 350 Ohm | 350 Ohm | |
| Excitation Voltage | 10 VDC | 10 VDC | [5] |
| Insulation Resistance | ≥5 GOhm | ≥5 GOhm | |
| Zero Balance | ≤2 % FS | ≤2 % FS | [1] |
| Shunt Calibration | ≤0.25 % FS | ≤0.25 % FS | [1][6] |
| Auto ID | TTL Proprietary | TTL Proprietary | |
| Physical | |||
| Size - Shaft Length | 3.23 in | 82.0 mm | [8] |
| Size - Housing Length | 2.30 in | 58.4 mm | [8] |
| Size - Housing Height | 2.00 in | 50.8 mm | [8] |
| Weight | .75 lb | 340 gm | |
| Mounting | 1/4 inch Sq Drive | 6.35 mm Sq Drive | [7] |
| Sensing Element | Strain Gage | Strain Gage | |
| Housing Material | Aluminum | Aluminum | |
| Shaft Material | Steel | Steel | |
| Electrical Connector | PT02H-12-10P | PT02H-12-10P | |
| Maximum Speed | 5000 RPM | 5000 RPM | |
三轴向ICP®型动态力传感器 | ||||||||
型号 | 量程 压缩或拉伸 x轴和y轴/Z轴 | 灵敏度 （mV/N） | zui大承受力 | 谐振频率 | 分辨率 x轴和y轴/Z轴（N rms） | 温度范围 ℃ | 接头 类型 | 重量 gm |
260A01 | 2200 / 4500 N | 2.2 / 0.56 | 3000 /6000 N | 90 k Hz | 0.009 / 0.027 | -54—+121 | 4 针 | 26 |
260A02 | 4500 / 4500 N | 1.1 / 0.56 | 4500 /6000 N | 0.027 / 0.027 | 45 | |||
260A03 | 18 k / 45 k N | 19 k / 50k N | 39 k Hz | 0.045 / 0.22 | 45 | |||