Silicone Mold Release Formula 300
PRODUCTCODE : E-7 BRANDNAME : Silicone Mold Release Formula300 |
| DEscriptIONSilicone Mold Release Formula 300 is packed in aerosolspray container with a polysiloxane compound and the product ispropelled through the use of a non-CFC gas and the finished productdoes not contain any CFC.Formula 300 is developed for precisioninjection and compression moulding of elastomers, plastic and fibreglass materials. It prevents sticking of the moulded parts to themould surface and cavities, also to the processing and fabricatingequipment. It can also be used as a general purpose lubricant forglass, rubber, plastic and metal surfaces where friction or releaseis a problem. |
| Typical Physical & Chemical PropertiesSpecific Gravity (25°C): 1.2(concentrate)Flash Point: None (concentrate)Appearance: ClearcolourlessFlammability: Flammable (aerosol)Operating Temperature:up to 315°CEvaporation Rate: < 1 minute |
Directionof Use
|
| Caution Contents under pressure. Do not spray near any fire or sparks. Donot store or expose the container in places with temperature above40°C. Do not pierce or burn the container. Use in well ventilatedareas. Avoid breathing the vapor and keep out of reach ofchildren. |
