PRODUCTCODE : EP-1 BRANDNAME : Ejector Pin Lubricant Formula100 |
| DEscriptION Formula 100 was developed specifically as a thin film low speedsliding ejector pin lubricant for the plastic injection moldingindustries. The application of such a lubricant will eliminate andprevent breakage and seizing of ejector pins. It will help in thereduction of production downtime if machines need to be stopped forthe replacement of broken pins. |
| PRODUCTPROPERTIES Non-Soiling, Non-Emulsifiable, Non-Staining, Thin-Film Lubrication,Transparent, Colourless, Rust Preventive. Operating Temperature:-20°C to ±130°C. |
| Typical Physical & Chemical Properties (Concentrate Only)SpecificGravity (25°C): 0.69 g/ccFlash Point: < 0°CAppearance: Amber,transparentFlammability: FlammableOperating Temperature: -20°C to±130°C in all cases which we have tested even at 230°C mold temperature, Formula 100 would still give lastinglubrication. |
| : Clear colorlessFlammability: FlammableEvaporation Rate:> 10 minutes at room temperature |
| Typical Physical & Chemical PropertiesSpecific Gravity 25°C(Concentrates): 0.75Flash Point (Concentrates): 55 °C (TCC)WaterDisplacement: PassAppearance: Transparent oil filmOdour: Sweetpleasant |
