西门子CPU1211C模块
西门子CPU1211C模块
西门子CPU模块代理商
M 2max, G – Maximum output torque of the gearboxcomponents
This torque must not be exceeded during operation. It ispermissible for a maximum of 30000 revolutions of the output shaft.An endurance strength configuration of the gearbox becomesnecessary, if the output torques up to M2max, G areused (see Configuration Manual).
Transmission ratio i | M 2max, G – Maximum output torque of the gearboxcomponents in Nm | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Gearbox | NRK050 | NRK070 | NRK090 | NRK120 | NRK155 | ||||
1-stage | ||||||||||
3 | 17.5 | 45 | 136 | 184 | – | |||||
4 | 24 | 53 | 144 | 248 | 736 | |||||
5 | 21 | 48 | 131 | 275 | 712 | |||||
7 | 13.5 | 40 | 104 | 216 | ||||||
8 | 9.5 | 29 | 80 | 192 | ||||||
10 | 8 | 61 | 152 | 336 | ||||||
2-stage | ||||||||||
9 | 19 | 155 | 251 | |||||||
12 | 312 | |||||||||
15 | ||||||||||
16 | ||||||||||
20 | ||||||||||
25 | ||||||||||
32 | ||||||||||
40 | ||||||||||
50 | ||||||||||
64 | 12 | |||||||||
100 | ||||||||||