Motortype

Permanent-magnet synchronous motor

Permissibleoperating conditions without derating

Ambienttemperature

-15 ... +40 °C (5 ... 104 °F)

Installationaltitude, max.

1000 m(3281 ft)

Degree ofprotection

According toEN 60034-5 (IEC 60034-5, ISO 20653)

IP66,IP67

IP69K (doesnot apply to the shaft outlet)

Cooling

According toEN 60034‑6

Naturalcooling (IC410)

Type ofconstruction

According toEN 60034‑7 (IEC 60034‑7)

IM B5(IM V1, IM V3)

Shaftextension

According toDIN 748‑3 (IEC 60072‑1)

Plainshaft
Optional shaft with feather key (half-key balancing)

Shaft andflange accuracy

According toDIN 42955 (IEC 60072‑1)

Tolerance N
In each case for radial eccentricity of the shaft extension,concentricity of the centering edge, and axial eccentricity of themounting flange to the axis of the shaft extension.

Vibrationseverity grade

According toEN 60034‑14 (IEC 60034‑14)

Grade A
is maintained up to rated speed

Statorwinding insulation

According toEN 60034‑1 (IEC 60034‑1)

Thermal class155 (F)
for a winding overtemperature of ΔT = 100 K

Soundpressure level LpA (1 m), max.

According toISO 1680

1FS2104

55 dB(A)+3 dB(A) tolerance

1FS2105 and1FS2106

65 dB(A)+3 dB(A) tolerance

1FS2208

70 dB(A)+3 dB(A) tolerance

Encodersystem

AM22DQC(absolute encoder 22-bit + 12-bit multiturn)

Holdingbrake

Optionalintegrated holding brake

Connection

One CableConnection (OCC) for signals and power,
open cable end for direct connection to SINAMICS S210converter or
cable end with plug connector to connect a MOTION-CONNECT basicline

Surface

Stainlesssteel 1.4404, roughness < 0.8 μm

Certificatesof suitability

cURus, CE,EAC, CEL, EHEDG