605B01传感器样本资料
605B01传感器期货8-10周
Biaxial ring-style, industrial, ceramic shear ICP® accel, 100mV/g, 0.5 to 5k Hz, side exit, 3-pin conn., biaxial single pointISO 17025 accredited calibration
Sensitivity: (±20%) 100 mV/g(10.2 mV/(m/s²))
Frequency Range: (±3dB) 30 to 300000 cpm(.5 to 5000 Hz)
Sensing Element: Ceramic
Measurement Range: ±50 g(±490 m/s²)
Weight: (without cable) 3.9 oz(110.6 gm)
All specifications are at room temperature unless otherwisespecified.
[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of thespecified fre
[4] Typical.
[5] 1/4-28 has no e in S.I. units.
[6] See PCB Declaration of Conformance PS023 for details.
| Supplied | |||
| 081A68 | Captive mounting bolt 1/4-28 x.90" | ||
| ACS-2T | NIST Traceable Single PointCalibration at 100 Hz for Each Axis | ||
(M) Metric Mount
| Accessories: | |||
| M081A68 | Captive Mounting Bolt | ||
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Sensitivity (±20 %) | 100 mV/g | 10.2 mV/(m/s²) | |
| Measurement Range | ±50 g | ±490 m/s² | |
| Frequency Range (±3 dB) | 30 to 300000 cpm | .5 to 5000 Hz | |
| Resonant Frequency | 600 kcpm | 10 kHz | |
| Broadband Resolution (1 to 10000 Hz) | 350 µg | 3434 µm/sec2 | |
| Non-Linearity | ±1 % | ±1 % | |
| Transverse Sensitivity | ≤5 % | ≤5 % | |
| Environmental | |||
| Overload Limit (Shock) | 5000 g pk | 49050 m/s² pk | |
| Temperature Range | -65 to +250 °F | -54 to +121 °C | |
| Temperature Response | See Graph %/°F | See Graph %/°F | |
| Enclosure Rating | IP68 | IP68 | |
| Electrical | |||
| Settling Time (within 1% of bias) | ≤2.0 sec | ≤2.0 sec | |
| Discharge Time Constant | ≥0.3 sec | ≥0.3 sec | |
| Excitation Voltage | 18 to 28 VDC | 18 to 28 VDC | |
| Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
| Output Impedance | <150 Ohm | <150 Ohm | |
| Output Bias Voltage | 8 to 12 VDC | 8 to 12 VDC | |
| Spectral Noise (10 Hz) | 8 µg/√Hz | 78.5 (µm/sec2)/√Hz | |
| Spectral Noise (100 Hz) | 5 µg/√Hz | 49.1 (µm/sec2)/√Hz | |
| Spectral Noise (1 kHz) | 4 µg/√Hz | 39.2 (µm/sec2)/√Hz | |
| Electrical Isolation (Case) | >100000000 Ohm | >100000000 Ohm | |
| Physical | |||
| Size - Diameter | 1.38 in | 34.9 mm | |
| Size - Height | 1.00 in | 25.4 mm | |
| Weight (without cable) | 3.9 oz | 110.6 gm | |
| Mounting Thread | 1/4-28 UNF | Not Applicable | |
| Mounting Torque | 2 to 5 ft-lb | 2.7 to 6.8 Nm | |
| Sensing Element | Ceramic | Ceramic | |
| Sensing Geometry | Shear | Shear | |
| Housing Material | Stainless Steel | Stainless Steel | |
| Sealing | Welded Hermetic | Welded Hermetic | |
| Electrical Connector | 3-Pin MIL-C-5015 | 3-Pin MIL-C-5015 | |
| Electrical Connection Position | Side | Side | |
| Electrical Connections (Pin A) | X axis | X axis | |
| Electrical Connections (Pin B) | Z axis | Z axis | |
| Electrical Connections (Pin C) | Ground | Ground | |