HT356B01传感器再带1.5米线缆034K10
HT356B01传感器哪家公司做
All specifications are at room temperature unless otherwisespecified.
ProductNotes
[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Terminating connector limited to 325F (163C).
[4] Increased current up to 20mA acceptable to 250F (121C)
[5] See PCB Declaration of Conformance PS023 for details.
Accessories:
| Supplied | |||
| 034G05 | 4-cond. shielded cable, 5 ft(1.5M), 4-pin plug to (3) BNC plugs | (1) | |
| 080A109 | Petro Wax | (1) | |
| 080A90 | Quick Bonding Gel | (1) | |
| ACS-1T | NIST traceable triaxial amplituderesponse, 10 Hz to upper 5% fre | (1) | |
OptionalVersions:
(J) Ground Isolated
| ENGLISH | SI | |
| Size - Width | .28 in | 7.10 mm |
| Size - Length | .28 in | 7.10 mm |
| Size - Height | .28 in | 7.10 mm |
| Weight | .04 oz | 1.2 gm |
| Electrical Isolation | >100000000 Ohm | |
(W) Water Resistant Cable
| ENGLISH | SI | |
| Electrical Connector | Sealed IntegralCable | |
| English: | SI: | ||
|---|---|---|---|
| Performance | |||
| Sensitivity (±20 %) | 5 mV/g | 0.51 mV/(m/s²) | |
| Measurement Range | ±1000 g pk | ±9810 m/s² pk | |
| Frequency Range (±5 %) (y or z axis) | 2 to 8000 Hz | 2 to 8000 Hz | |
| Frequency Range (±5 %) (x axis) | 2 to 5000 Hz | 2 to 5000 Hz | |
| Frequency Range (+1 dB) (x axis) | ≥8 kHz | ≥8 kHz | |
| Resonant Frequency | ≥50 kHz | ≥50 kHz | |
| Broadband Resolution (1 to 10000 Hz) | 0.003 g rms | 0.03 m/s² rms | [2] |
| Non-Linearity | ≤1 % | ≤1 % | [1] |
| Transverse Sensitivity | ≤5 % | ≤5 % | |
| Environmental | |||
| Overload Limit (Shock) | ±10000 g pk | ±98100 m/s² pk | |
| Temperature Range (Operating) | -65 to +356 °F | -54 to +180 °C | [3] |
| Temperature Response | See Graph %/°F | See Graph %/°F | [2] |
| Electrical | |||
| Excitation Voltage | 18 to 30 VDC | 18 to 30 VDC | |
| Constant Current Excitation | 2 to 4 mA | 2 to 4 mA | [4] |
| Output Impedance | ≤200 Ohm | ≤200 Ohm | |
| Output Bias Voltage | 7 to 12 VDC | 7 to 12 VDC | |
| Discharge Time Constant | 0.24 to 1.0 sec | 0.24 to 1.0 sec | |
| Settling Time (within 10% of bias) | <3 sec | <3 sec | |
| Spectral Noise (1 Hz) | 1200 µg/√Hz | 11772 (µm/sec2)/√Hz | [2] |
| Spectral Noise (10 Hz) | 300 µg/√Hz | 2943 (µm/sec2)/√Hz | [2] |
| Spectral Noise (100 Hz) | 100 µg/√Hz | 981 (µm/sec2)/√Hz | [2] |
| Spectral Noise (1 kHz) | 30 µg/√Hz | 294 (µm/sec2)/√Hz | [2] |
| Physical | |||
| Sensing Element | Ceramic | Ceramic | |
| Sensing Geometry | Shear | Shear | |
| Housing Material | Titanium | Titanium | |
| Sealing | Hermetic | Hermetic | |
| Size - Height | 0.25 in | 6.35 mm | |
| Size - Length | 0.25 in | 6.35 mm | |
| Size - Width | 0.25 in | 6.35 mm | |
| Weight (without cable) | 0.04 oz | 1.0 gm | [2] |
| Electrical Connector | Integral Cable | Integral Cable | |
| Electrical Connection Position | Side | Side | |
| Cable Termination | 1/4-28 4-Pin Jack | 1/4-28 4-Pin Jack | [3] |
| Cable Length | 5 ft | 1.5 m | |
| Cable Type | 034 4-cond Shielded | 034 4-cond Shielded | |
| Mounting | Adhesive | Adhesive | |
Platinum Stock Product Triaxial, lightweight miniature, ceramicshear ICP® accel., 5 mV/g, to +356 F (+180 C)
Sensitivity: (±20%) 5 mV/g (0.51 mV/(m/s²))
Measurement Range: ±1000 g pk (±9810 m/s² pk)
Electrical Connector: Integral Cable