483C41八通道线路供电
483C41美国PCB供电器
8-channel, line-powered,ICP®/charge sensor signal cond., gain, selectable LPF, Ethernet,keypad/display
Sensor Input Type(s): ICP®, Voltage, Charge
Channels: 8
TEDS Sensor Support: Yes
Power Required: AC Power
All specifications are at room temperature unless otherwisespecified.
ProductNotes
[1] The high frequency tolerance is accurate within ±5% of thespecified frequency.
[2] The low frequency tolerance is accurate within ±25% of thespecified frequency.
[3] Max input signal is dependant on sensor bias.
[4] Typical.
[5] User adjustable, factory set at 4 mA (± 1.0 mA). Each channelindividually adjustable.
[6] Use T1.6A fuse.
[7] See PCB Declaration of Conformance PS024 for details.
Accessories:
Supplied | |||
017AXX | Power Cord | (1) | |
EE75 | PCB MCSC Control Software. | (1) |
English: | SI: | ||
---|---|---|---|
Performance | |||
Channels | 8 | 8 | |
Sensor Input Type(s) | ICP®, Voltage, Charge | ICP®, Voltage, Charge | |
Gain (ICP®/ Voltage Input) | 0.1 to 200 | 0.1 to 200 | |
Gain (mV/pC ) (Charge Input) | 0.01 to 2000 | 0.01 to 2000 | |
Gain Increment(minimum) (ICP®/ VoltageInput) | 0.1 | 0.1 | |
Gain Increment(minimum) (Charge Input) | 0.01 | 0.01 | |
Accuracy(ICP®/ Voltage Input) (Gain, 0.1 to0.4) | ±5 % | ±5 % | |
Accuracy(ICP®/ Voltage Input) (Gain, 0.5 to200) | ±1 % | ±1 % | |
Accuracy(Charge Input) (Gain, 0.01 to0.04) | ±6 % | ±6 % | |
Accuracy(Charge Input) (Gain, 0.05 to2000) | ±1 % | ±1 % | |
Input Range(maximum) (Charge Input) | 100000 pC pk | 100000 pC pk | |
Input Range(maximum) (ICP® Input) | 10 Vpk | 10 Vpk | [3] |
Input Range(maximum) (Voltage Input) | 5 Vpk | 5 Vpk | |
Low Frequency Response (-5 %) (ICP®/Voltage Input) | ≤0.05 Hz | ≤0.05 Hz | |
Low Frequency Response (-5 %) (ChargeInput) | 0.5 Hz | 0.5 Hz | [2] |
Electrical Filter Roll-off | 160 dB/decade | 160 dB/decade | |
Filter Type (8-pole Butterworth) | Low Pass | Low Pass | |
High Frequency Response (-3 dB) (Gain from0.01 to 99.9) | >100 kHz | >100 kHz | |
High Frequency Response (-3 dB) (Gain from100 to 2000) | >80 kHz | >80 kHz | |
Electrical Filter Corner Frequency (-10%) | 0.1-0.3-1-3-10-30 kHz | 0.1-0.3-1-3-10-30 kHz | [1] |
Electrical Filter Pass Band AmplitudeAccuracy | 1 % | 1 % | |
Phase Response (at 1 kHz) | ±2 ° | ±2 ° | |
Non-Linearity | 1 % | 1 % | |
Cross Talk | <-72 dB | <-72 dB | |
TEDS Sensor Support | Yes | Yes | |
Fault/Bias Monitor LEDS | Open/Short/Overload | Open/Short/Overload | |
Control Interface | |||
Digital Control Interface | Ethernet | Ethernet | |
Human Interface | Keypad | Keypad | |
Display | 2 rows, 16 columns | 2 rows, 16 columns | |
Environmental | |||
Temperature Range (Operating) | +32 to +120 °F | 0 to +50 °C | |
Electrical | |||
Power Required (direct input to unit) | AC Power | AC Power | |
AC Power (47 to 63 Hz) | 100 to 240 VAC | 100 to 240 VAC | |
AC Power | ≤0.7 Amps | ≤0.7 Amps | [6] |
Excitation Voltage (To Sensor) | >24 VDC | >24 VDC | |
DC Offset | <50 mV | <50 mV | |
Constant Current Excitation (ToSensor) | 2 to 20 mA | 2 to 20 mA | [5] |
Output Voltage (minimum) | 10 V | 10 V | |
Output Current (minimum) | 10 mA | 10 mA | |
Output Impedance | <50 Ohm | <50 Ohm | |
Broadband Electrical Noise (1 to 10000 Hz)(Gain x1) | 50 µV/rms | 50 µV/rms | [4] |
Spectral Noise (1 Hz) | 8 µV/√Hz | 8 µV/√Hz | [4] |
Spectral Noise (10 Hz) | 2 µV/√Hz | 2 µV/√Hz | [4] |
Spectral Noise (100 Hz) | 0.7 µV/√Hz | 0.7 µV/√Hz | [4] |
Spectral Noise (1 kHz) | 0.7 µV/√Hz | 0.7 µV/√Hz | [4] |
Spectral Noise (10 kHz) | 0.6 µV/√Hz | 0.6 µV/√Hz | [4] |
Broadband Electrical Noise (1 to 10000 kHz)(Gain x10) | 75 µV rms | 75 µV rms | [4] |
Spectral Noise (1 Hz) | 18 µV/√Hz | 18 µV/√Hz | [4] |
Spectral Noise (10 Hz) | 1.5 µV/√Hz | 1.5 µV/√Hz | [4] |
Spectral Noise (100 Hz) | 1.0 µV/√Hz | 1.0 µV/√Hz | [4] |
Spectral Noise (1 kHz) | 1.0 µV/√Hz | 1.0 µV/√Hz | [4] |
Spectral Noise (10 kHz) | 1.0 µV/√Hz | 1.0 µV/√Hz | [4] |
Broadband Electrical Noise (1 to 10000 Hz)(Gain x100) | 350 µV rms | 350 µV rms | [4] |
Spectral Noise (1 Hz) | 100 µV/√Hz | 100 µV/√Hz | [4] |
Spectral Noise (10 Hz) | 10 µV/√Hz | 10 µV/√Hz | [4] |
Spectral Noise (100 Hz) | 6 µV/√Hz | 6 µV/√Hz | [4] |
Spectral Noise (1 kHz) | 5 µV/√Hz | 5 µV/√Hz | [4] |
Broadband Electrical Noise (1 to 10000 Hz)(0.1 mV/pC) | 52.0 µV/rms | 52.0 µV/rms | [4] |
Spectral Noise (10 kHz) | 5 µV/√Hz | 5 µV/√Hz | [4] |
Spectral Noise (1 Hz) | 10.0 µV/√Hz | 10.0 µV/√Hz | [4] |
Spectral Noise (10 Hz) | 1.5 µV/√Hz | 1.5 µV/√Hz | [4] |
Spectral Noise (100 Hz) | 0.6 µV/√Hz | 0.6 µV/√Hz | [4] |
Spectral Noise (1 kHz) | 0.6 µV/√Hz | 0.6 µV/√Hz | [4] |
Spectral Noise (10 kHz) | 0.6 µV/√Hz | 0.6 µV/√Hz | [4] |
Broadband Electrical Noise (1 to 10000 Hz)(1.0 mV/pC) | 52.0 µV/rms | 52.0 µV/rms | [4] |
Spectral Noise (1 Hz) | 14.0 µV/√Hz | 14.0 µV/√Hz | [4] |
Spectral Noise (10 Hz) | 2.0 µV/√Hz | 2.0 µV/√Hz | [4] |
Spectral Noise (100 Hz) | 0.7 µV/√Hz | 0.7 µV/√Hz | [4] |
Spectral Noise (1 kHz) | 0.7 µV/√Hz | 0.7 µV/√Hz | [4] |
Spectral Noise (10 kHz) | 0.7 µV/√Hz | 0.7 µV/√Hz | [4] |
Broadband Electrical Noise (1 to 10000 Hz)(10.0 mV/pC) | 56.0 µV/rms | 56.0 µV/rms | [4] |
Spectral Noise (1 Hz) | 15.0 µV/√Hz | 15.0 µV/√Hz | [4] |
Spectral Noise (10 Hz) | 2.0 µV/√Hz | 2.0 µV/√Hz | [4] |
Spectral Noise (100 Hz) | 0.6 µV/√Hz | 0.6 µV/√Hz | [4] |
Spectral Noise (1 kHz) | 0.6 µV/√Hz | 0.6 µV/√Hz | [4] |
Spectral Noise (10 kHz) | 0.6 µV/√Hz | 0.6 µV/√Hz | [4] |
Oscillator (+/- 2% ) (Internal Generator -ICP®/ Voltage Mode) | 0.1 V pk | 0.1 V pk | |
Oscillator (+/- 2% ) (Internal Generator -Charge Mode) | 100 pC pk | 100 pC pk | |
Oscillator (+/- 2% ) | 100/1000 Hz | 100/1000 Hz | |
Overload Threshold (±0.5 Vpk) | 10 Vpk | 10 Vpk | |
Physical | |||
Electrical Connector (Input, sensor) | BNC Jack | BNC Jack | |
Electrical Connector (Output) | BNC Jack | BNC Jack | |
Electrical Connector (Ethernet) | RJ-45 | RJ-45 | |
Size - Height (nominal ) | 1.75 in | 44.5 mm | |
Size - Width (nominal ) | 19 in | 482.6 mm | |
Size - Depth (nominal ) | 13.7 in | 348 mm | |
Weight | 8 lb | 3.6 kg |